NOT
MEASUREMENT
SENSITIVE
MIL-DTL-81929C(AS)
26 November 1997
SUPERSEDING
MIL-M-81929B(AS)
IN PART
5 APRIL 1989
DETAIL SPECIFICATION
MANUALS, TECHNICAL: ILLUSTRATED PARTS BREAKDOWN FIGURES;
TECHNICAL CONTENT REQUIREMENTS (WORK PACKAGE CONCEPT)
This specification is approved for use by the Naval Air Warfare Center,
Department of the Navy, and is available for use by all Departments and Agencies
of the Department of Defense, within the distribution limitations noted at the
bottom of this page.
1. SCOPE
1.1 Scope. This specification prescribes the technical content requirements for the
preparation of illustrated parts breakdown (IPB) figures for use in a manual.
1.2 Classification (types of manuals). The types of manuals should be as prescribed in
MIL-DTL-81927.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure
the completeness of this list, document users are cautioned that they must meet all specified
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: Commander, Naval Air Warfare
Center Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100 by
using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the
end of this document or by letter.
AMSC N/A
AREA TMSS
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business