NOT MEASUREMENT
SENSITIVE
MIL-PRF-85337B(AS)
11 April 2012
SUPERSEDING
MIL-M-85337A(NAVY)
15 November 1984
PERFORMANCE SPECIFICATION
MANUALS, TECHNICAL: QUALITY ASSURANCE PROGRAM;
REQUIREMENTS FOR
This specification is approved for use by the Naval Air Systems Command and is available for
use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes technical manual quality assurance (TMQA)
requirements necessary to ensure the adequacy and accuracy of technical manual (TM) content
through a coordinated contractor and Government program. Unless otherwise specified, the
quality assurance (QA) requirements included in this specification apply to both printed/Portable
Document Format (PDF) technical manuals and Interactive Electronic Technical Manuals
(IETMs). Procedures are established for the development and implementation of a contractor
program encompassing the conduct of TMQA program reviews, quality reviews, in-process
reviews, adequacy reviews, validation, and verification requirements.
1.2 Applicability. This specification applies to all TM procurements when referenced in the
contract or other contractual document.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
Comments, suggestions, or questions on this document should be addressed to the Naval
Air Systems Command (Commander, Naval Air Warfare Center Aircraft Division, Code
4L8000B120-3, Highway 547, Lakehurst, NJ 08733-5100) or emailed to
michael.sikora@navy.mil. Since contact information can change, you may want to verify
the currency of this address information using the ASSIST online database at
https://assist.daps.dla.mil.
AMSC N/A
AREA TMSS
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business