MIL-DTL-24784/12B(SH)
form:
a. Descriptive (identification plate data) which identifies manufacturer, type, model, part or
identifying number (PIN), joint electronic type designation (when applicable), repairable
identification code (RIC) and allowance parts list (APL), as applicable.
b. Functional characteristics, such as: power requirements, horsepower, pressure, capacity,
modes of operation, power output, frequency, pulse characteristics, sensitivity, selectivity,
including tolerances, where applicable.
c. Capabilities and limitations, such as: pounds of thrust, knots, turning radius, minimum and
maximum ranges, degree of coverage, resolution, accuracy.
d. Rated outputs, such as: wattages, voltages, horsepower, gallons per minute.
e. Environmental characteristics, such as: ambient temperatures, heat dissipation per unit,
humidity limits.
3.6.2.5 Equipment, accessories and document supplied. A tabular listing of all equipment and
documents supplied shall be included. List the equipment and its units (see 6.4.5), and accessories
(special tools, test equipment, miscellaneous parts, and Government furnished items) which form
a part of, or are supplied with the equipment. The table shall include the following:
a. Column 1, Quantity. This column shall contain the quantity of each unit and accessories
supplied with the equipment.
b. Column 2, Item name or nomenclature. This column shall contain the official name (for
example, pump, winch) or nomenclature (name and designation) of each component, unit, or
accessory.
c. Column 3, PIN number, RIC number, or unit number. This column shall contain the PIN,
RIC, or unit number of each equipment unit or accessory.
d. Column 4, Overall dimensions. This column shall contain the crated (if available) and
uncrated height, width, and depth in inches (or inches and centimeters) of each unit or
accessory.
e. Column 5, Weight and volume. This column shall contain the crated (if available) and
uncrated weight and volume in cubic feet of each unit and accessory.
3.6.2.6 Equipment, accessories and documents not supplied. Equipment and systems (such as
controls, foundations mounts, couplings, and appurtenances) and related publications, which are
not furnished with the basic equipment covered by this manual, but which attach or relate
importantly to the basic equipment, shall be described in sufficient detail to establish their
correlation with respect to physical and functional interfaces. If applicable, a reference should be
made to the shipbuilder's power plant technical manual which contains additional information.
3.6.3 Chapter 2, Operation. Operating instructions shall include all the procedures necessary to
enable operating personnel to efficiently and effectively use the equipment in accomplishing its
designated task. These operating instructions shall be in sufficient detail to allow operators,
having previous experience in the operation of similar or related equipment, to independently and
safely operate the equipment without additional training or explanation.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business