INCH-POUND
MIL-DTL-24784/18B (SH)
15 February 2002
SUPERSEDING
MIL-DTL-24784/18A(SH)
15 March1999
ASSOCIATED DETAIL SPECIFICATION
SURFACE MISSILE SUBSYSTEM OR EQUIPMENT
MANUAL REQUIREMENTS
This specification is approved for use by the Naval Sea Systems Command, Department
of the Navy, and is available for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification sets forth content requirements for the preparation of technical
manuals covering the installation, operation, maintenance, and parts support of surface missile
subsystems or equipment.
1.1.1 Scope of coverage. Unless otherwise specified in the technical manual contract
requirements (TMCR) (see 6.2), the manuals should include all information necessary to perform
all (organizational, intermediate, and depot-level) maintenance. No manual should omit
maintenance or logistics information for any subsystem or equipment thereof designated
repairable, regardless of the location of the designated repair point (ship, tender, or shore facility)
unless the contract requires that the information be included in a separate document to be
provided to the Government and reference is made thereto.
2. APPLICABLE DOCUMENTS
The documents listed in this section are specified in sections 3 and 4 of this
2.1 General.
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN SEA 05Q, 1333 Isaac Hull Ave SE Stop 5160, Washington Navy Yard DC
20376-5160 by using the Standardization Document Improvement Proposal (DD Form 1426)
appearing at the end of this document or by letter.
AMSC N/A
AREA TMSS
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business