NOT MEASUREMENT
SENSITIVE
MIL-DTL-81748E(AS)
10 December 2004
SUPERSEDING
MIL-DTL-81748D(AS)
15 December 1995
DETAIL SPECIFICATION
MANUALS, TECHNICAL: RAPID ACTION CHANGES AND INTERIM RAPID ACTION
CHANGES; PREPARATION OF; GENERAL SPECIFICATION FOR
This specification is approved for use by the Naval Air Systems Command, and is available for
use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for the preparation of Rapid
Action Changes (RACs) and Interim Rapid Action Changes (IRACs) to Technical Manuals
(TMs) under the cognizance of the Naval Air Systems Command (NAVAIRSYSCOM) (see
6.1.1, 6.1.2, and 6.1.3 for information pertaining to applicability, exceptions, and exclusions).
1.2 Classification. Rapid Action Changes to Technical Manuals covered by this
specification shall be of the following types:
a. RAC - issued by Naval activities or Contract Administrative Offices (CAOs) as a
complete formal change to a TM (including all associated front matter).
b. IRAC - issued by Naval activities or Contract Administrative Offices (CAOs) as an
interim change to provide urgent TM change data.
Comments, suggestions, or questions on this document should be addressed to: Commander,
Naval Air Systems Command, Code 49100B120-3 Highway 547, Lakehurst, NJ. 08733-5100 or
emailed to thomas.omara@navy.mil. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST Online database at
AMSC N/A
AREA TMSS
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business