MIL-DTL-81929C(AS)
3.3.3 Parts to be listed. All end items, repair parts and items of support equipment
provisioned for the applicable maintenance level support of the article shall be listed. Support
equipment shall be listed in accordance with 3.3.3s.
a. Items without part numbers;
(1) Type and model numbers for equipment(s) that have not been assigned part
numbers, but are identified by type and model numbers, shall have the type or model
number placed in the "PART NUMBER" column. Either the type or model number
shall be entered, e.g., the one that corresponds to a National Item Identification
Number (NIIN) that has an assigned SM&R code.
(2) If a vendor's number is entered, the type number shall be identified in the
description column.
(3) Parts which have neither a part number nor a type and model number assigned shall
have a dash (-) placed in the "PART NUMBER" column.
(4) Hardware procurable from normal commercial sources that does not have a part
number assigned shall be identified by the abbreviation "COML" in the "PART
NUMBER" column. Identifying information such as dimensions, material, and type
shall be given after the description to enable replacement procurement from
commercial sources.
b. Standard hardware provisioned for lowest level of maintenance usage:
(1) Standard hardware (such as bolts, studs, packing, hose clips, fasteners, clamps,
resistors, capacitors, diodes, transistors, gaskets) which are manufactured to conform
to the requirements of NAS, JAN, USAF, NAVAIR, AN or MS drawings shall be l
listed.
(2) However, when an item of standard hardware has been provisioned at the lowest
level of support regardless of multilevel application, only the quantity of hardware
required at the applicable level(s) of maintenance covered shall be listed and
illustrated.
c. Oversize and undersize parts. When oversize or undersize parts are required and
furnished and they are neither interchangeable with, nor within allowable production
tolerances of the standard size part, they shall be listed by the part number specified in
the contract drawing specification.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business