MIL-DTL-87269D
3.5.3.4.5 Rectiication elements. Rectiication (i.e., corrective maintenance actions) elements shall contain
references to procedural rectiication tasks, checkout tests used to report the success of completed rectiication
tasks, and a list of all faults that the rectiication shall repair.
3.5.3.5 Parts information. Two types of parts information shall be included: (1) maintainer/operator
information, and (2) supply information. Elements containing either type shall refer explicitly to
corresponding elements of the other type.
3.5.3.5.1 Parts information for the maintainer or operator. Parts information provided for a system
maintainer or operator shall include such items as units per assembly, usable-on code, mean time between
failures (MTBF), and reference designator, if applicable.
3.5.3.5.2 Parts information provided for parts supply. Parts information provided for the parts supply
process shall constitute unambiguous identiication of a part so that it can be reordered, and may
consist of such items as: the part number; Commercial and Government Entity (CAGE) code; Source,
Maintenance, and Recoverability (SMR) code; Hardness Critical Item (HCI) identiication; and National
Stock Number (NSN), if applicable.
VERIFICATION
4
4.1 Veriication. Unless otherwise speciied in the contract or purchase order:
a. Validity of the accuracy and scope of the IETMDB technical content, user interface functionality,
and EDS-IETM interface shall be the responsibility of the contractor (see 6.2f.).
b. The contractor shall provide suitable facilities to perform the validation functions speciied in
this document.
c. The contractor s existing quality assurance procedures shall be used.
d. The government reserves the right to review any of the veriications.
4.1.1 Minimum veriication requirements. As a minimum, veriication shall ensure the following:
a. Suitability of the IETMDB for the intended maintenance environment.
b. Usability by the intended users.
c. Compatibility with other Government systems.
4.1.2 Compliance. All IETMDB shall meet all of the requirements of sections 3 and 4 of this speciication.
The requirements set forth in this speciication shall become a part of the contractor s overall inspection
system or quality program. The absence of any requirements in this speciication shall not relieve the
contractor of the responsibility of ensuring that all products or supplies submitted to the Government
for acceptance comply with all requirements of the contract. Use of sampling inspections shall be in
accordance with commercially acceptable quality assurance procedures; however, Government approval for
use of sampling in QA procedures does not authorize submission of known defective material, either
indicated or actual, nor does it commit the Government to accept defective material.
PACKAGING
5
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
5.1 Intended use. For acquisition purposes, the packaging requirements shall be as speciied in the contract
or order (see 6.2g.). When actual packaging of materiel is to be performed by DoD personnel, these
personnel need to contact the responsible packaging activity to ascertain requisite packaging requirements.
Packaging requirements are maintained by the Inventory Control Point s packaging activity within the Military
Department or Defense Agency, or within the Military Department s System Command. Packaging data
retrieval is available from the managing Military Department s or Defense Agency s automated packaging
iles, CD-ROM products, or by contacting the responsible packaging activity.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business