MIL-PRF-63029J
3.5.4.1.6 Supersedure notice <super>. The supersedure notice shall be placed on the cover and
title page when the manual is revised and supersedes all other manuals and changes. A single
manual supersedure notice shall appear immediately below the TM Number. A multi-volume
manual supersedure notice shall be the last notice prior to the service nomenclature. The
applicable portions of the following notice shall be used:
"This manual supersedes (applicable manual number) dated (date of superseded
document), including all changes."
3.5.4.2 Warning page <warnsum>. A warning page(s) shall include each general type of
warning and warning symbol used within the TM. The warning page shall not include a word-
for-word repetition of all the warnings in the TM. It shall be limited to alerting the user of the
different types of hazards in general terms including general hazardous subject data such as
radiation, chemicals, high voltage, gas pressure, laser light, bird strikes/wildlife hazards, etc.
that will be encountered in operating and maintaining the aircraft or equipment. The warning
page shall also include first aid data. The warning page (Figure 2) shall start on a right-hand
page immediately following the cover. The warning page shall consist of the following in the
order specified below:
a. First aid data.
b. Warning icons. (as applicable)
c. Warnings data. (as applicable)
d. Hazardous materials icons. (as applicable)
e. Hazardous materials descriptions. (as applicable)
3.5.4.2.1 First Aid Data. First aid data shall be included in warning summary. The first
paragraph shall reference FM 4-25.11, First Aid. Any additional first aid data not described
in FM 4-25.11 shall be described in this section.
3.5.4.2.2 Warning and hazardous materials icons. Use of standardized icons to improve
readers' recognition of hazards is allowed. Approved icons for use in technical manual
warnings are available online at https://www.logsa.army.mil/mil40051/tmsspecs.cfm.
Warning icons used shall be defined in the warning summary.
3.5.4.2.2.1 Development of icons. Icons are enclosed in a square or rectangular box. The
signal word(s) for icons appear outside the box below the icon(s).
3.5.4.2.2.2 Safety warnings with icons. The approved safety warning icons can be used in
conjunction with the WARNING or CAUTION header and description of the hazard. For
additional information on the use and placement of warnings and icons, refer to MIL-STD-
40051-1 and -2.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business