MIL-DTL-24784/10C(NAVY)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASME INTERNATIONAL
ASME Y14.38
-
Abbreviations and Acronyms (DoD adopted)
(Copies of this document are available from ASME International, 22 Law Drive, PO Box 2900, Fairfield, NJ
07007-2900 or online at www.asme.org.)
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS, INC. (IEEE)
IEEE 315
-
Graphic Symbols for Electrical and Electronics Diagrams (DoD adopted)
(Copies of this document are available from the Institute of Electrical and Electronics Engineers, Inc., 445 Hoes
Lane, PO Box 1331, Piscataway, NJ 08855-1331 or online at www.ieee.org.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein (except for related specification sheets), the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Preparation of digital data for page-oriented printed delivery. The source information for the TAB shall be
prepared in the Extensible Markup Language (XML) or the Standardized General Mark-Up Language (SGML) in
accordance with MIL-DTL-24784.
3.2 Security classifications, distribution statement, and destruction notice. The security classifications,
distribution statement, and destruction notice shall be in accordance with MIL-DTL-24784.
3.3 Deliverable products and data items. Deliverable products and data items shall be in accordance with
MIL-DTL-24784 (see 6.2).
3.4 Format and development instructions. Unless otherwise specified by the acquiring activity or herein (see
6.2), the writing style, safety precautions, tabular material, graphics, and numbering shall be in accordance with
MIL-DTL-24784.
3.4.1 Format and layout. All typed and illustrative matter developed for final production shall be in a
horizontal (landscape) format. Layout of text pages shall be in accordance with figure 1. Layout of illustration
3.4.2 Marginal copy. Marginal copy shall consist of running heads and feet of illustration titles. Marginal
copy shall be located on each page as indicated in figures 2 and 3. Format for 4¼- by 11-inch TABs shall be in
accordance with figure 2 and shall maintain the same margins and marginal copy.
3.4.3 Running heads. The running head for each page shall include the ship applicability notation (ship class or
hull number), security classification (supplement) or distribution limitation, NAVSEA publication identification
number, and the generic title of the diagram or contents (see 3.6.6.1).
3.4.4 Running feet.
3.4.4.1 Page number positioning. All page numbers shall be located at the lower outside of the page,
approximately ¼ inch from the bottom and ¼ inch from the outside edge.
3.4.5 Page size. Unless otherwise specified by the acquiring activity (see 6.2), the page size for all preliminary
and final TABs shall be 11 by 8½ inches, with a maximum image area of 9½ by 7½ inches (see figure 1). Only
when the increased cost of production can be justified by the effectiveness of the page layout will the alternate page
size of 4¼ by 11 inches be specified. When this alternate is specified, the acquisition documents must prohibit the
use of foldouts and foldups.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business