MIL-DTL-24784/20B (SH)
d. Rated outputs, such as: wattages, voltages, horsepower, gallons per minute.
e. Environmental characteristics, such as: ambient temperatures, heat dissipation per unit,
humidity limits.
3.6.2.3.10 Equipment, accessories, and documents supplied. A tabular listing of all equipment
and documents supplied shall be included. List the equipment, its units, and its accessories
(special tools, test equipment, miscellaneous parts, and Government-furnished items) which form
a part of, or are supplied with, the equipment. The table shall include the following:
a. Column 1, Quantity. This column shall contain the quantity of each unit and accessories
supplied with the equipment.
b. Column 2, Item name or nomenclature. This column shall contain the official name (for
example, pump, winch) or nomenclature (name and designation) of each component, unit or
accessory.
c. Column 3, PIN number, RIC number, or unit number. This column shall contain the PIN,
RIC, or unit number of each equipment unit or accessory.
d. Column 4, Overall dimensions. This column shall contain the crated (if available) and
uncrated height, width, and depth in inches (or inches and centimeters) of each unit or
accessory.
e. Column 5, Weight and volume. This column shall contain the crated (if available) and
uncrated weight and volume in cubic feet of each unit and accessory.
3.6.2.3.11 Equipment and publications required but not supplied. A tabular listing of all test
equipment and publications required but not supplied with the equipment or system shall be
included. If a measurement requirement is established which cannot be satisfied by the
subcategory (SCAT) codes listed in this guide, or alternate test procedures cannot be developed
utilizing the listed SCAT request for assistance should be directed to:
Commander
Naval Sea Systems Command
Arlington, VA 22242-5160
ATTN: SEA 0415
The listing shall contain:
a. Column 1, SCAT code. When applicable, this column shall contain the four digit group of
numbers, which is included in NAVSEA ST000-AG-IDX-010 TMDE used to identify a
measurement requirement.
b. Column 2, Test equipment category. This column shall contain the item name of each item of
equipment required.
c. Column 3, Representative test equipment model number. This column shall contain the model
number of the standard or Substitute Standard General Purpose Electronic Test Equipment,
listed in NAVSEA ST000-AG-IDX-010 TMDE, which can be used to satisfy the
measurement parameters.
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business