MIL-DTL-24784 / 21B (SH)
ATTN: SEA 0415
The listing shall contain:
a. Column 1, SCAT code. When applicable, this column shall contain the four digit group of
numbers, which is included in NAVSEA ST000-AA-IDX-010/PEETE used to identify a
measurement requirement.
b. Column 2, Test equipment category. This column shall contain the item name of each item of
equipment required.
c. Column 3, Representative test equipment model number. This column shall contain the model
number of the standard or Substitute Standard General Purpose Electronic Test Equipment,
listed in NAVSEA ST000-AA-IDX-010/PEETE , which can be used to satisfy the
measurement parameters.
d. Column 4, Equipment test parameters. This column shall specify the range of test parameters
which shall be satisfied by this test equipment item (it shall not define the ranges of the test
equipment model).
e. Column 5, Application. This column shall indicate the intended use of the test equipment (for
example, scheduled maintenance, troubleshooting, corrective maintenance, or installation).
3.6.2.2.7 Field and factory changes. Equipment changes (for example, field changes, factory
changes, engineering changes or notices, modifications, and so forth) shall be identified and
included in separate tables. Field and factory changes shall be included as follows:
a. Column 1, Change number. This column shall list the change number for each field and
factory change considered and included in the preparation of the manual.
b. Column 2, Nomenclature. This column shall list the equipment nomenclature and
Government serial numbers of equipments affected by the change.
c. Column 3, Description. This column shall contain a brief statement identifying the change and
its purpose.
3.6.2.2.8 Description of technical manual. A brief description of the technical manual and an
introduction to the use of the data contained within shall be included.
3.6.3 Chapter 2, Operations. Operating instructions shall include all the procedures necessary to
enable operating personnel to efficiently and effectively use the equipment in accomplishing its
designated task. These operating instructions shall be in sufficient detail to allow operators,
having previous experience in the operation of similar or related equipment, to independently and
safely operate the equipment without additional training or explanation.
3.6.3.1 Introduction. The introduction shall provide an explanation of the purpose, scope,
supersedure data, and applicability of the technical manual, including the models, serial numbers,
and configurations covered. The interface relationship of the technical manual to other reference
publications and the relationship of the equipment to referenced systems or other equipment shall
also be included.
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business