NOT MEASUREMENT SENSITIVE
MIL-PRF-49503C (MI)
18 July 2013
-------------------------------
SUPERSEDING
MIL-PRF-49503B(TM)
NOTICE 1
18 March 2013
PERFORMANCE SPECIFICATION
GENERAL STYLE AND FORMAT,
TEST PROGRAM SETS FOR AUTOMATIC TEST EQUIPMENT
Reinstated after 18 July 2013 and maybe used for new and
existing design and acquisitions.
This specification is approved for use by the Department of the Army, and
is available for use by all Departments and Agencies of the Department of Defense.
.
l. SCOPE
1.1 Purpose. This specification contains the requirements for the preparation of operator
instructions and operational features required in Test Program Sets (TPS) for all equipment.
1.2 Applicability. Generally, each item specified herein will be included in the test program
(TP) unless the item is not applicable to the particular equipment or an exception has been
granted by the contracting activity. Additional information and instructions deemed necessary
for a specific item of equipment, but not specified herein, will be included in the test program for
that item of equipment, if authorized by the contracting activity.
1.3 Examples/figures. The figures used in this specification are examples only. The text of this
specification takes precedence over examples.
Comments, suggestions, or questions on this document should be addressed to U.S. Army Research &
Development and Engineering Command, ATTN: RDMR-SET, Redstone Arsenal, AL 35898-5000.
Since contact information can change, you may want to verify the currency of this address information
using the ASSIST Online database at https://assist.dla.mil
AMSC N/A
AREA TMSS
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business