MIL-PRF-63003B(TM)
3.11.5 Chapter 4 thru ( ), (Major functional group). Unless otherwise specified by the contracting
activity (see 6.2), these chapters shall be titled, arranged, and correspond to the functional groups as they
appear in the maintenance allocation chart (MAC) and the repair parts and special tools list (RPSTL). The
total number of chapters in the BDAR TM shall be determined by the number of major functional groups
applicable to the equipment/system covered by the manual.
3.11.5.1 Section I, Introduction. This section shall contain paragraphs as follows:
a.
Scope - brief statement that describes the purpose and application of the overall coverage of the
chapter.
Assessment procedure - flow chart or table formatted in accordance with Figure 7 or 8. This
b.
assessment procedure shall apply to the subsystem or major component identified by the chapter title. The
procedure shall direct or reference the user to the instructions for making fixes/repairs. References shall
indicate chapter, section, paragraph, or another document, as appropriate. The assessment procedure shall
be developed and arranged so that logical and expedient methods are used to locate trouble.
c.
Repair procedure index - list of all procedures contained in the chapter, listed in the order in which
they appear and formatted in accordance with Figure 9. Procedures authorized for training and listed in
appendix E of the TM shall be boxed in.
3.11.5.2 Section II, ( ). This section and each subsequent section in the chapter (the total number of
sections shall be determined by the nature and complexity of the subsystem or major component) shall
follow the format specified in 3.11.4.2.
3.11.6 Last chapter, chapter ( ) auxiliary equipment. Auxiliary equipment shall be covered in the last
chapter of the BDAR TM. The format and content, in general, shall conform to the same requirements
established for the chapters covering major functional groups. (See 3.11.5.)
3.11.7 Appendixes. Appendixes shall be used with BDAR TMs to provide lists of supplies specifically
provided, or available to aid in performing BDAR fixes. When applicable, appendixes shall immediately
follow the last chapter and shall appear in the order as presented in 3.11.7.1 through 3.11.7.5. Each
appendix shall have a brief introduction stating its purpose. All tables and charts shall be simple and self
explanatory. The BDAR fix statement is required at the beginning of each appendix. See Figure 1.
3.11.7.1 Appendix A, references. Publications referenced in the TM text shall appear in alphanumeric
order by publication number. The title of publications shall be on the same horizontal line as the publication
number. See Figure 10.
3.11.7.2 Appendix B, special or fabricated tools. All tools and test equipment called out in the TM that
are not common or require fabrication to perform BDAR fixes shall be listed by an appropriate tool name or
function. When fabrication is required, instructions (and material list) shall be included. See Figure 11.
3.11.7.3 Appendix C, expendable/durable supplies and materials. This appendix shall contain a list of
expendable/durable supplies and materials that are available for BDAR fixes. Material shall be listed
alphabetically by item name. A brief description shall follow the item name. An item number shall be
assigned to the item for reference/identification only. For example, see Figures 12 and 13.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business