MIL-PRF-63010C
e.
air intake and exhaust system (see figure 17),
f.
voltage regulation system (see figure 18),
g.
output supply system (see figure 19),
h.
hydraulic system (see figure 20),
i.
governor control system (see figure 21),
j.
fault system (see figure 22).
3.3.3 Chapter 2 - operating instructions. This chapter shall contain all the operating information that
the user needs to operate the equipment and ancillary equipment during normal and unusual conditions. It
shall include checks and services required of the operator. The required sections are as follows:
a. Section I -
Operating procedures,
b. Section II - Operation under unusual conditions,
c. Section III - Operation under battle conditions,
d. Section IV - Operation of ancillary equipment,
e. Section V - Preventive maintenance checks and services (PMCS),
f. Section VI - Movement to a new work site.
3.3.3.1 Section I - operating procedures. This section shall contain the operating procedures from the
instruction data plate on the generator set. The operator's control panel shall be illustrated with word
callouts keyed to specific controls, instruments, or components necessary for the operation of the
equipment (see figure 23). The illustrated control panel will be supported by a narrative description,
purpose, and normal condition/indication of all controls, instruments, or components. Instructions shall be
provided to install separately packed components, installation of the generator set, and generator set
conversion. Location of controls and instruments and normal instrument readings shall be shown in
conjunction with and in their proper sequence for: placing the generator set in operation, operating the
generator set in each of its modes of operation, removing it from operation and placing it in shutdown
status. Narrative instructions shall be used to provide continuity in the presentation of the information and
to lead the operator from illustration to illustration or from sequence to sequence.
3.3.3.2 Section II - operation under unusual conditions. This section shall contain instructions for
operating the generator set under unusual conditions such as extreme heat, extreme cold, high humidity,
dusty and sandy areas, salt water areas, high altitude, and snow conditions. Any protective and
preventive measures required for operating the generator set under unusual conditions shall be included.
This section shall contain only information which differs from that covering operation under normal
conditions.
3.3.3.3 Section III - operation under battle conditions. This section shall reference the applicable
battlefield damage assessment and repair manual.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business