or demilitarization of conventional and chemical ammunition, hereafter referred to as ammunition.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11

MIL-PRF-63012B

3.6 Chapter 3, quality acceptance requirements. This chapter shall identify acceptance requirements

including ballistic test requirements (BTR), product defect criteria, acceptable quality levels (AQL), or site

defect criteria identified in the operational steps to include defect classification or to incorporate appropriate

statistical process control (SPC) statements for performing activities.

3.7

Definitions. All quality assurance terms used in the DMWR shall be listed and defined.

3.8 Appendixes. Appendixes shall be added to a DMWR as applicable for purposes of illustration,

application, and general information. Appendix identification shall be alphabetical throughout the document

in the order of reference in the text (i.e., APPENDIX A, APPENDIX B, etc). Each appendix shall begin on

a right-hand page. Appendix pages shall be consecutively numbered (i.e., A-1, A-2, etc). Appendixes shall

immediately follow the last figure of the DMWR.

3.8.1 Appendixes. The following appendixes shall be Included as applicable:

3.8.1.1 Appendix A. References. This appendix shall consist of all publications referenced in the

DMWR (except military specifications and drawings which are listed in Appendix D). The publications

shall be listed in groups by publication type. If nongovernment, the source shall be provided. The complete

name and number of each publication shall be used. See figure 6 for an example.

3.8.1.2 Appendix B. Consumable materials. This appendix shall consist of a list in tabular format and

shall contain as a minimum this data: item number, NSN, federal item name and description if needed, part

number, CAGEC, and unit of issue. See figure 7 for an example.

3.8.1.3 Appendix C. Equipment and special facilities. Appendix C shall consist of a list of equipment

and special facilities required to perform the operations described in the DMWR. See figure 8 for an

example.

3.8.1.4 Appendix D. Tabulated data, military specifications, and drawings. Appendix D shall consist of

a list of tabulated data extracted from Army Data Sheets, and/or major specifications and drawings

applicable to the DMWR operations. See figure 9 for an example.

3.8.1.5 Appendix E. Approved intraplant transfer equipment. This appendix lists suggested or

commonly available equipment. If the DMWR operations require no intraplant APE, this appendix should

be omitted. See figure 10 for an example.

3.8.1.6 Appendix F. Pentachlorophenol (PENTA)-treated packing materials. When specified by the

contracting activity (see 6.2), this appendix shall be used to include the latest requirements in all DMWRs.

See figure 11 for an example.

3.8.1.7 Appendix G. Environmental requirements. This appendix shall be used to include the latest

requirements. As a minimum, this appendix shall include air, noise, and emission problems and controls as

applicable.

3.8.1.8 Appendix H. Hazard analysis or briefing. This appendix shall contain a hazard analysis updated