or demilitarization of conventional and chemical ammunition, hereafter referred to as ammunition.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11

MIL-PRF-63012B

to include the latest requirements. Potential hazards which may result in injury or death with appropriate

countermeasures shall be identified.

3.8.1.9 Other appendixes. When specified by the contracting activity (see 6.2), other appendixes shall

be added to the DMWR.

3.9 Authentication page. An authentication page shall be included after the last appendix of the

DMWR.

4. VERIFICATION

4.1

Verification. The verification requirements shall be as specified in the contract or order (see 6.2).

5. PACKAGING

5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the

contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD personnel, those

personnel need to contact the responsible packaging activity to ascertain requisite packaging requirements.

Packaging requirements are maintained by the Inventory Control Point's packaging activity within the

Military Department or Defense Agency, or within the Military Department's System Command. Packaging

data retrieval is available from the managing Military Department's or Defense Agency's automated

packaging files, CD-ROM products, or by contacting the responsible packaging activity.

6. NOTES

(This section contains information of a general or explanatory nature that may be helpful, but is not

mandatory.)

6.1 Intended use. This specification is intended to be used in the preparation or acquisition of

DMWRs. The requirements of this specification may be invoked by contract. However, when a government

activity is writing the DMWR, it assumes the role of contractor and is responsible for meeting the

requirements of this specification.

Acquisition requirements. Acquisition documents should specify the following information:

6.2

Title, number, and date of this specification.

Issue of the DODISS to be cited in the solicitation, and if required, the specific issue of

individual documents referenced (See 2.2.1).

Title and publication number of DMWR(s) to be prepared.

Style and format of the DMWR if other than MIL-STD-38784 (see 3.1.1).

Whether line drawings must be used in the DMWR (see 3.1.4).