MIL-DTL-23618H(AS)
3.1.8.1 Operational or functional check procedures.
a. Justified procedures for scheduled checks of hidden functions shall be included (not
referenced) in the PMRM.
b. Justified procedures longer than four card faces shall be referenced (not included) in the
PMRM.
3.1.8.2 Removal and installation procedure.
a. Work around procedures (procedures that do not require complete removal/installation or
disassembly/assembly) shall be included in the PMRM and shall be held to a four-card-
face maximum.
b. Normally, procedures shall be complete. Instructions such as "reverse removal
procedures" shall not be used.
c. If a removal or installation procedure is obvious, the primary step shall be given as a
command and the details shall not be required.
3.1.8.3 Inspection procedures.
a. Inspection criteria for all inspections shall be included in the PMRM.
b. Procedures for determining acceptable tolerances and wear limits shall be referenced to the
applicable TM.
3.1.8.4 Adjustment, calibration, or repair procedures. Information such as standard shop
practices, calibration or adjustment procedures, repair procedures, or means of rectifying
conditions (including the arrestment of corrosion and troubleshooting to find the cause of
malfunctions) shall not be included or referenced in the PMRM.
3.1.9 Illustrations. Illustrations shall consist of simple line drawings and shall have sharp,
clean, black lines on a white background. Lines shall have sufficient weight to ensure clear
reproduction. Unacceptable art includes lead pencil drawings, office copies, photostats, half-tone
prints, and illegible lettering.
3.1.10 Zonal inspection. A zonal inspction is a general inspection of a specific area of
aircraft or SE where an existing scheduled inspection is being accomplished. These inspections
are for obvious defects, such as leaks, frayed cables, cracks, corrosion or physical damage and do
not require disassembly, special tools or test equipment. Zonal inspections are performed in
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business