MIL-DTL-23618H(AS)
APPLICATION
The maintenance requirements set forth herein shall be accomplished at the intervals listed on the
abbreviation and index card.
3.3.7.10 AMCM or UAV daily manual (introduction and application statements). The
introduction and application statements may be presented as expressed below. When hazardous
materials are referenced in the manual, the statement in 3.3.4.1 shall be included.
INTRODUCTION
This manual contains the minimum daily maintenance requirements. Daily requirements include
inspections for defects at a greater depth than the turnaround checklist and inspection for system
degradation. These inspections are designed to ensure the equipment is safe for operation. The
daily cards and tasks are sequentially arranged and consecutively numbered in the most logical
order to perform the required tasks. A comprehensive introduction for this equipment is
contained in (publication number of the manual containing the complete introduction for the end
item).
APPLICATION
Daily requirements are valid for the period established by OPNAVINST 4790.2. The
accomplishment of these requirements prior to flight shall not satisfy the requirements of a
turnaround inspection.
3.3.7.11 AMCM or UAV calendar or start/special/preservation/conditional manual
(introduction and application statements). The introduction and application statements may be
presented as expressed below. When hazardous materials are referenced in the manual, the
statement in 3.3.4.1 shall be included.
INTRODUCTION
This manual contains the minimum calendar or start/special/preservation/ conditional requirements
necessary to ensure the equipment is safe for operation. Special requirements are scheduled to be
performed on a particular day or after a cumulative number of operating hours or cycles/events.
Preservation requirements provide short term preservation procedures, maintenance while
preserved, and depreservation procedures. Conditional requirements are contained in this manual
if no detailed requirements exist in an appropriate technical manual for references in the PMIC.
The cards have been arranged in groups in this manual in the following order: calendar or
start/special/preservation/ conditional. Each card defines the group to which the card belongs.
Clearances, pressures, tolerances, illustrations, SE required, and manual references are presented
where pertinent. A comprehensive introduction for this equipment is contained in (publication
66
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business