MIL-DTL-23618H(AS)
they may be grouped by rating or MOS group, one rating or MOS group per primary
card.
(7) Except for illustration cards, the requirements for electrical power, hydraulic power
and conditioned air shall be consistent throughout all maintenance requirements
decimal cards as indicated on the prime card.
(8) Requirements shall be grouped by one work area or zone or, when necessary, by a
limited number of work areas or zones.
(9) The EMT shall be limited to two hours on the primary card and its associated decimal
card(s) when possible.
c. Preservation requirements.
(1) On preservation cards, a note shall be added on each prime task card to identify the
preservation card sequence.
(2) The following note shall be added to the prime task card in the preservation deck
listing all special inspection MRCs which must be complied with in conjunction with
preservation MRCs.
"Note: The following special cards remain valid during short term preservation:
(list applicable cards)."
(3) For each special inspection card which remains valid during preservation, the following
note shall be added:
"NOTE: The requirements of this card remain valid when the aircraft is in a level I
short term preservation status."
d. QA requirements.
(1) Functions which require a QA inspector to observe the actual accomplishment of
the maintenance task, i.e., torquing, assembly, etc., shall have the following note
placed immediately preceding the task to be observed:
"NOTE: QA (card number) shall witness (task/step number)."
(2) Functions which require a QA inspection after accomplishment of the maintenance
task shall have the following note placed immediately preceding it:
76
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business