MIL-DTL- 24784/11C(NAVY)
h.
Other systems and miscellaneous - A description shall be given and illustrations included:
(1) Shore power connections:
(a)
Location.
(b) Reference to power system diagrams.
(c)
Current capacity.
(d) Hook-up procedures.
(2) Receptacles for portable connections for portable submersible pumps and portable welding sets:
(a)
An illustration to show the locations and rating of outlets on the plan views of each deck on
which outlets are located. In addition, an elevation view at the centerline shall be shown with all
outlets as projected on the center plane. Sufficient compartmentation shall be shown to indicate
accurately the location of outlets.
(3) Indication of length of cables supplied.
(4) How many cable types and in which repair station they are stowed.
(5) Arrangements for placing in simultaneous operation in each machinery room the maximum number of
submersible pumps using the specified number and lengths of portable cables supplied. This shall be
shown on both plan and elevation views.
(6) A drawing showing the location of main wireways on all decks.
(7) Casualty power system: A description of the purpose, scope, limitations, and proper use of this
system. An isometric diagram of the complete casualty power system (showing terminals) shall be
included.
(8) Degaussing system: A general description of the system with instructions for operation. A sketch
illustrating the approximate location of the coils.
(9) Isolated receptacle circuits: A general description of this system including its purpose and need for
maintaining high insulation resistance to ground.
(10) Electrical schematic of lighting and outlet circuits and a table showing electrical feeders and breakers
by compartment.
3.8.3.2 Part 2 - general description of electric equipment and electrically-operated auxiliaries.
a.
This part shall be divided into four chapters as follows:
(1) Chapter 1 - Power equipment.
(2) Chapter 2 - Electric-operated auxiliaries.
(3) Chapter 3 - Lighting equipment.
(4) Chapter 4 - Miscellaneous equipment (test panels, storage batteries, instruments, and related
equipment).
b.
Data, as applicable, for each item of power and lighting equipment, exclusive of power equipment tabulated
in Chapter 2, shall be tabulated under the following headings in Chapters 1, 3, and 4:
(1) Name of equipment.
(2) Name of manufacturer.
(3) Number of units.
(4) Location (designating number in accordance with the Ship Specification).
(5) Electrical data (brief).
(6) Controlling equipment (type and manufacturer).
(7) Reference to applicable technical manuals.
(8) For electric-operated auxiliaries, data shall be tabulated as follows:
(a)
Name of auxiliary.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business