MIL-DTL-24784/12B(SH)
b. Test the first units (normally power supplies) which must be operating properly. When test
results are within the required tolerance, include reference to the next logical test. Include a
reference to the corrective maintenance or troubleshooting data to be used if test results are
not within tolerances.
4. VERIFICATION
4.1 Quality assurance requirements. The quality assurance requirements for delivery of book
plans, review draft copies, preliminary technical manuals, final reproducible copy, technical
manuals, replenishment materials, changes and revisions shall be in accordance with
MIL-DTL-24784.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the
contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by the Inventory Control Point's
packaging activity within the Military Department or Defense Agency, or within the Military
Department's System Command. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but it is
not mandatory.)
6.1 Intended use. The technical manuals prepared to this specification are intended to be used
for installation, operation, maintenance, repair, and parts support of HM&E equipment. The
technical manual will be used as a training document in the classroom and as a source for on-the-
job training.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of the specification (or any TMCR referencing this specification).
b. Scope of coverage if other than as specified (see 1.1.1).
c. Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of individual
documents referenced (see 2.2.1 and 2.3).
d. Deliverable products and data items (see 3.3)
e. Arrangement if other than standardized format (see 3.4)
f. Format and preparation instruction if other than as specified in MIL-DTL-24784 (see 3.5)
g. Warranty and guarantee information (see 3.6.2.1).
h. Any special requirements for a standard log form (see 3.6.3.5).
22
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business