MIL-DTL-24784/17B(SH)
3.6.10.9.1 Test procedures. Testing procedures shall be presented in a logical order as follows:
a. Energize the system.
b. When test results are within the required tolerance, include a reference to the next logical test.
c. When test results are out of tolerance, include a reference to the corrective maintenance or
troubleshooting data. Reference shall be made to troubleshooting diagrams except where
probable causes of failure can be predicted, in which case reference may be made directly to
an alignment or repair procedure.
3.6.10.9.2 Installation standards summary sheets. The installation standards summary sheet shall
provide spaces for recording the results of all installation verification and maintenance standard
tests (see figure 17-12). Spaces shall also be provided for recording the results of all maintenance
or performance standards tests included in Chapter 6, scheduled maintenance, that are required
for reference by the Navy technician when troubleshooting or for Government acceptance
certification. Each space shall be identified by the step or paragraph number which provides the
instructions for accomplishment. Each space shall contain the respective unit of measurement (for
example, vdc or Hz.). When applicable, waveforms shall be included to show the points on the
pattern where the measurement is to be taken. In addition, critical installation data shall be
included, such as length of transmission line.
4. VERIFICATION
4.1 Quality assurance requirements. The quality assurance requirements for delivery of book
plans, review draft copies, preliminary technical manuals, final reproducible copy, technical
manuals, replenishment materials, changes and revisions shall be in accordance with
MIL-DTL-24784.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the
contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by the Inventory Control Point's
packaging activity within the Military Department or Defense Agency, or within the Military
Department's System Command. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business