MIL-DTL-24784/18B (SH)
a.
Safety precautions.
b.
A list of tools and test equipment identified by type, manufacturer, and model number.
c.
The title of the test to be performed.
d.
The minimum rating of the technician expected to perform the task.
e.
Preliminary setup data required to perform the test.
f.
Detailed procedures for accomplishing the test. Procedures requiring lengthy and identical
setup data may be presented in detail in one procedure and referenced in succeeding
procedures.
g. Values or conditions, with tolerances, indicative of normal operation.
h. References to troubleshooting or corrective actions to be used if the test values are not within
tolerances.
i. Illustrations to support the test.
3.6.6 Chapter 5, Troubleshooting. This chapter shall include an introduction to explain the
material content of the volume as related to the PMS (see 6.4.3). The material contained in this
portion shall result from a maintenance analysis and verification program and shall provide all
information, procedures, and diagrams required by a technician to locate a malfunction in the
equipment. This portion shall comprise at least the following items unless otherwise specified in
the TMCR:
a.
Introduction.
b.
Supporting maintenance data.
1.
Troubleshooting index.
2.
Maintenance turn-on procedure.
3.
Relay, switch, and lamp index.
c.
Troubleshooting diagrams (see MIL-DTL-24784).
d.
Reference diagrams.
3.6.6.1 Introduction. The introduction shall include a brief explanation of fault-isolation
contained in the program, and state that familiarity with trouble- shooting material is required
prior to performing any troubleshooting. The text shall briefly explain the purpose, scope, and
arrangement of the troubleshooting material. The explanation shall be supported by a sample
troubleshooting problem. The text shall require mandatory reporting via PMS Feedback Report
(OPNAV Form 4790.7) of any failure of fault-isolation material to lead to a corrective action.
The text shall also refer to use of the Table of Established Values if one is provided and if its use
relates to material in this portion.
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business