MIL-DTL-24784/7C(NAVY)
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or
order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these
personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging
requirements are maintained by the Inventory Control Point's packaging activities within the Military Service or
Defense Agency, or within the military service's system commands. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. The TRS supplements the technical maintenance section of the technical manual for HM&E
items, electronic items, or ordnance items as applicable and provides all necessary technical information required to
rebuild or restore the HM&E item, electronic item, or ordnance item. Normal maintenance and test procedures
covered in the technical manual for the item should not be repeated in the TRS except when deemed necessary for
clarity or continuity. Instead, reference to the manual should be made.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a.
Title, number, and date of the specification (or any TMCR referencing this specification).
b.
Type and quantity of the manual required (see 1.1).
c.
Issues of documents to be cited in the solicitation (see 2.2.1).
d.
Identify whether the TRS is for HM&E equipment, electronic equipment, or ordnance equipment (see 3.2).
e.
Deliverable products and data items (see 3.3).
f.
EJRs (see 3.3.1).
g.
Format items if other than specified (see 3.3.2).
h.
Arrangement if other than standardized format (see 3.5).
i.
j.
When TRS should reference mandatory overhaul replacement parts list (see 3.7.4.2, 3.8.7.1.5, and 3.9.3.3).
k.
Identification of procedures, data collection, and corrective actions required (see 3.7.4.5, 3.8.5.4, and
l.
m. Supplementary technical data (see 3.8.5.4.4).
n.
When a separate list of mandatory replacement parts is required (see 3.8.7.1.5).
o.
p.
Packaging requirements (see 5.1).
6.3 Technical manual acquisition. This specification (or a TMCR based on this specification) must be listed on
the Contract Data Requirements List (DD Form 1423) in order to acquire the technical manuals described by this
specification. An alternate acquisition strategy should be devised by contracting officers for those solicitations or
contracts, which are exempted from using the Uniform Contract Line Item Numbering System (UCLINS).
6.4 Definitions. The words or phrases used throughout this specification sheet are defined in MIL-DTL-24784
and as follows:
6.4.1 Acceptance tests. An examination and test of an item after completion of its overhaul or repair to ensure
the item satisfies minimum specified performance requirements.
6.4.2 Class B overhaul. Work which requires such overhaul or repair to restore the operating and performance
characteristics of a system, subsystem, or component to its original design and technical specifications.
6.4.3 Critical procedures. Those procedures which:
22
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business