MIL-DTL-24784/7C(NAVY)
(3) To facilitate parts location, a locating grid and corresponding guide chart shall be provided when more
than 30 items are mounted on a board.
(4) Test point graphic symbols shall be located outside the board area, when not printed on the board by
manufacturer, with callout leaders drawn from these symbols to the test point locations. In like
manner (when equivalent information is not printed on the board) the input and output terminals shall
be labeled with the functions (signals and voltages) carried, and their point of origin or destination.
j.
Other special information, instructions, methods, processes, and materials peculiar to the repair operation
that are not contained elsewhere in the TRS.
Obvious repair actions, such as soldering and use of hand tools, shall not be included except where these actions
involve hazards to personnel or equipment.
3.8.5.5 FAT. This section shall specify that:
a.
After accomplishment of all overhaul actions, and the repairable item is considered ready for final
examination, the item shall be inspected for proper identification, workmanship quality, and subjected to
the FAT to verify satisfactory performance.
b.
The FAT shall be accomplished in accordance with the established performance parameter requirements
and test procedures (see 3.8.4) and make reference to the other pertinent data contained elsewhere in the
TRS.
c.
The FAT shall be witnessed by designated quality assurance personnel responsible for final inspection and
acceptance of the repairable item.
d.
The test results and all required data shall be recorded on the TRS test data record (see 3.8.4.2).
e.
Upon satisfactory completion of all FAT provisions, the TRS test data record shall be verified for
completeness and accuracy, and duly dated, signed, and approved by the applicable responsible depot
personnel thereby certifying the satisfactory operation of the repairable electronic item and its condition as
RFI to the fleet.
f.
The overhaul activity shall ensure the disposition of the completed TRS test data record as follows:
(1) One copy of the record shall be packaged with the repaired item for information purposes.
(2) One copy shall be mailed to the field maintenance agent (FMA) if an FMA has been designated for
the repaired items.
(3) One copy shall be mailed to the technical repair agency or its designated representative.
(4) The original shall be retained by the overhaul activity in a central file as a permanent record of the
items repair. The file shall be maintained current.
3.8.6 Chapter 6 - packaging, handling, storage, and transportation (PHST). This chapter shall identify the
PHST requirements including any special stowage (shipboard), storage (shore-based), handling equipment, and
transportation (delivery concepts and needs) for systems, equipment, and support items (spares and repair parts).
3.8.6.1 Packaging and handling requirements. This section shall describe the packaging and handling
requirements (conventional, special, or both) applicable to the repairable items covered in the TRS. This section
shall specify that the maintenance activity designated for overhaul of the item shall determine and maintain the latest
instructions, documentation, work details, and requirements for packaging and handling the repairable item.
3.8.6.1.1 Special handling procedures. This section shall describe the procedures required for using the special
crates, boxes, containers, transportation vehicles, and other facilities for repairable items handling. If there are no
requirements for special handling procedures or equipment, the TRS shall so specify.
3.8.6.1.2 Special packaging procedures. This section shall describe the procedures required for special
packaging of the repairable items. If there are no requirements for special packaging procedures, the TRS shall so
specify.
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business