MIL-DTL-87929D
d. Reference Material Required.
e. Applicable Time Compliance Technical Orders (TCTO)s.
f. Consumable Materials.
g. Applicable Support Equipment.
h. Illustrated Support Equipment.
i. Table of Limits (when applicable).
j. Foreword.
k. Technical Procedures.
3.4.3.4.1 Reference material required. All documents referenced in the WP that are required to accomplish
the task shall be listed in a tabular format by document number and title. If there is no reference material to
list, then only the table heading shall be included and the words NONE shall be centered below the table title.
3.4.3.4.2 Applicable TCTOs. All TCTOs pertinent to the WP shall be listed. TCTOs that have
been completed and rescinded shall be removed from the list at the next change to the WP. If there
are no applicable TCTOs to list, then, only the table title shall be included and the words NONE
shall be centered below the table title.
Consumable materials. Consumable materials, including expendable items, required within the WP
3.4.3.4.3
shall be
listed in a tabular format by nomenclature, speciication/part number, and CAGE code. Chemicals
shall be
grouped separately at the beginning of the list. If there are no consumable materials to list, then,
only the
table title shall be included and the words NONE shall be centered below the table title.
3.4.3.4.4 Applicable support equipment. Applicable test equipment and special tools used in the WP shall
be listed in a tabular format by part number, CAGE code, and nomenclature/type designation. If there
is no applicable support equipment to list, then, only the table title shall be included and the words
NONE shall be centered below the table title.
3.4.3.4.5 Illustrated support equipment. Test equipment and special tools not illustrated in use, within
the WP, shall be illustrated. Standard tools and test equipment need not be illustrated. If there is no
illustrated support equipment, then, only the heading shall be included and the words NONE shall be
centered below the table title.
3.4.3.4.6 Table of limits. When applicable, each technical WP/SWP shall have a table(s) of limits
including all clearances, backlashes, end-plays, spring pressure, etc., arranged in numerical sequence by
reference number. The table of limits shall be supported by an illustration(s) to show clearly all points of
limits. Illustrations shall not show limit values, but only reference numbers with leaders to the point
of clearance. The table(s) shall be cross-referenced to the igure on which the reference number is
located. The table shall be arranged as follows:
Dimensional
Limits
Reference Number
Figure Number
Description
New Mini-
Replacement Min-
mum/Maximum
imum/Maximum
3.4.3.4.7 Foreword.
The foreword shall contain a brief description of the WP technical content.
3.4.3.4.8 Technical procedures.
Technical procedures, for accomplishing the speciic tasks required by the
WP/SWP shall be included.
3.4.3.4.8.1 Warhead data. When applicable, procedures shall include any special instructions required for
"high explosive" and "incendiary" type warheads.
3.4.3.4.8.2 Arming/de-arming procedures.
When applicable, procedures for arming/de-arming of rocket
motors and munitions shall be included.
3.4.3.4.8.3 Contingency procedures. When applicable, procedures shall contain instructions pertaining
to special light evaluation conigurations, such as installation of a telemetry unit, and other procedures
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business