MIL-DTL-87929D
NOTE
This speciication is approved for use by the Department of the Air
Force and is available for use by all Departments and Agencies of the
Department of Defense.
SCOPE
1
1.1 Scope. This detail speciication covers the requirements for preparation of equipment Operation and
Maintenance (O&M) Technical Manuals (TM) in Work Package (WP) and Subordinate Work Package (SWP)
formats. Manuals, using the WP and SWP concept described within this speciication, are intended for use at
Intermediate and Depot levels on all equipment and at Organizational level for equipment not using the
MIL-DTL-83495 maintenance manual concept. This speciication provides for Standard Generalized Markup
electronic data delivery. All appendices are intended for compliance when required. The type(s) of manual(s)
to be prepared, as speciied by the acquiring activity, are as follows:
a. Maintenance Manuals.
1. Intermediate Maintenance Manuals.
2. Depot Maintenance Manuals.
3. Combined Maintenance Manuals.
4. On-Condition Maintenance Instruction Manuals (engines only).
5. Manual Set.
6. Accessories.
b. Operation and Maintenance Instruction Manuals.
c. Special Technical Manuals.
d. Checklists.
APPLICABLE DOCUMENTS
2
2.1 General. The documents listed in this section are speciied in sections 3, 4, or 5 of this speciication.
This section does not include documents cited in other sections of this speciication or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all speciied requirements of documents cited in
2.2 Government documents.
2.2.1 Speciications, standards, and handbooks. The following speciications, standards, and handbooks
form a part of this document to the extent speciied herein. Unless otherwise speciied, the issues of these
documents are those cited in the solicitation or contract.
MILITARY SPECIFICATION
MIL-PRF-5096
Manuals, Technical: Inspection and Maintenance Requirements;
Acceptance and Functional Check Flight Procedures and Checklists;
Inspection Work Cards; and Checklists; Preparation of
MIL-PRF-38807
Manuals, Technical: Illustrated Parts Breakdown, Preparation of
MILITARY STANDARDS
MIL-STD-681
Identiication Coding and Application of Hookup and Lead Wire
MIL-STD-38784
Technical Manuals: General Style and Format Requirements
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch or from the
Standardization Documents Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191115094.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business