MIL-DTL-87929 Technical Manuals, Operation And Maintenance Instructions In Work Package Format \(For Usaf Equipment\)This detail specification covers the requirements for preparation of equipment Operation and Maintenance \(O&M\) Technical Manuals \(TM\) in Work Package \(WP\) and Subordinate Work Package \(SWP\) formats. Manuals, using the WP and SWP concept described within this specification, are intended for use at Intermediate and Depot levels on all equipment and at Organizational level for equipment not using the MIL-PRF-83495 maintenance manual concept. This specification provides for Standard Generalized Markup Language \(SGML\) Document Type Definitions \(DTD\) usage \(see appendices A.1 through L\) required for electronic data delivery. All Appendices are intended for compliance when required.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18

MIL-DTL-87929D

APPENDIX H

SPECIAL REQUIREMENTS FOR ATE OPERATOR TEST PRO-

CEDURES TECHNICAL MANUAL

H.1 SCOPE.

H.1.1 Scope. This appendix provides the special or unique criteria, in addition to the provisions of

this speciication, required for development of an Automated Test Equipment (ATE) Operators Test

Procedures Technical Manual (TM). The markup tags described herein are based on rules outlined in

MIL-HNDBK-28001 and ISO 8879. The information contained in and referred to in this appendix forms a

part of the standard and is intended for compliance. The Document Type Deinition (DTD) referenced herein

may be obtained directly from the preparing activity (see A.4.3).

H.2 APPLICABLE DOCUMENTS.

H.2.1 Government documents. Not Applicable.

H.2.2 Non-government standards and other publications.

H.2.2.1 Non-government publications. The following documents form a part of this document to

the extent speciied herein. Unless otherwise speciied, the issues of these documents are those cited

in the solicitation or contract.

NON-GOVERNMENT PUBLICATIONS

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)

ISO 8879

Information Processing - Text and Ofice Systems - Standard

Generalized Markup Language (SGML) (DoD Adopted)

(Application for copies should be addressed to Standardization Documents Order Desk, Building 4D, 700

Robbins Avenue, Philadelphia, PA 19111-5094, for issue to DoD activities. Others may purchase copies from

the American National Standards Institute, 11 West 42nd Street, New York, NY 10036.)

H.3 SPECIAL REQUIREMENTS.

H.3.1 ATE operator test procedures manual. Operator test procedures manuals are used in conjunction with

ATE. Manuals prepared to this speciication must be compatible with the approved maintenance concept and

related documents such as computer program source listing, low charts and test requirements documents.

The manual shall contain speciic procedures for using one or more Computer Programs (CP) with ATE to

test, fault isolate, or calibrate one or more Units Under Test (UUT).

H.3.1.1 Foreword WP.

In addition to the requirements of 3.4.3.2, the following information shall be included.

H.3.1.1.1 Purpose. The intended function of the manual shall be described relative to the test equipment

type, unit(s) to be tested and applicable level of maintenance. These items shall be described by nomenclature,

type designation, reference designation, and part number, referring to the Table of Use and Applicability.