NOT MEASURMENT
SENSITIVE
MIL-PRF-38793C
19 Aug 2008
SUPERSEDING
MIL-PRF-38793B
6 Feb 1997
PERFORMANCE SPECIFICATION
TECHNICAL MANUALS: CALIBRATION PROCEDURES
- PREPARATION
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This performance specification covers the requirements for preparing technical
manuals containing manual or automated calibration procedures. It does not apply to calibration
procedures written for the exclusive use of the service's primary standards laboratories.
1.2 Applicability. This performance specification contains paragraphs and requirements which
are not applicable to all Services. Such paragraphs or requirements are prefixed to indicate the
Services to which they pertain: (A) for Army; (N) for Navy; and (F) for Air Force.
1.3 Detail. The level of detail contained in this performance specification is necessary to
comply with the requirements of the Joint Computer-aided Acquisition and Logistics Support
(JCALS) system.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples.
Comments, suggestions, or questions on this document should be addressed to 588
CBSS/GBHA, 813 Irving-Wick Dr W Suite 4M, Heath, Oh 43056-1199 or emailed to
MIL-PRF@AFMETCAL.AF.MIL since contact information can change; you may want to
verify the currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
AREA TMSS
1
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business