MIL-PRF-38793C
Air Force: TO 33K-1-100-1-WA-1 Calibration Procedure for Maintenance Data
Collection Codes and Calibration Measurement
Summaries.
TO 33K-1-100-2-CD-1 TMDE Calibration Notes, Calibration Interval, and
Work Unit Code Reference Guide.
(Copies of ARMY Technical Manuals are available at the Army Publishing Directorate at
https://www.apd.army.mil/usapa_home.asp . In the event that the APD Web site is unavailable,
you may access Army electronic publications and forms files, and the STARPUBS On-Line
Ordering System from either the Army Knowledge on line portal at
(Copies of NAVAIR publications are available online at https://www.navy.mil or from
Commanding Officer, Naval Aviation Technical Data and Engineering Services Command, P. O.
Box 357031, San Diego, CA 96135-7031)
(Copies of Air Force publications are not available online but can be ordered from the 562
CBSG/GBFA, 813 Irving-Wick W Dr, Heath, OH 43056-1199)
2.3 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 General requirements. The general style and format of preparation shall be in accordance
with the requirements of MIL-STD-38784. Calibration procedures shall be provided in a
separate manual for each test instrument (see 6.4.7). When specified by the acquiring activity
(see 6.2), similar test instruments (see 6.4.9), or variations of the same type or model of test
instrument, may be covered in the same manual. The manuals shall be delivered in electronic or
paper format as specified by the acquiring activity (see 6.2). Document type definitions (DTDs)
have not been included at this time. When electronic delivery of the manuals is required by the
acquiring activity, the contractor shall contact Det 2, HQ ESC/AV-2 prior to developing any
DTDs.
3.1.1 Numbering of paragraphs and procedural steps. All paragraphs and procedural steps shall
be numbered using the decimal numbering requirements of MIL-STD-38784.
3.1.2 Text content. A calibration procedure shall include the essential information required by
technicians to perform calibration of one or more test instruments. Each procedure shall include
instructions or reference data in sufficient detail to enable calibration technicians to determine if
the test instrument(s) is (are) operating within the prescribed performance limits without
requiring reference to other publications.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business