MIL-PRF-63017D(TM)
3. REQUIREMENTS
3.1 General. The TM shall conform to the following general requirements:
3.1.1 Style and format. Unless otherwise specified herein, the general style and format of munitions
equipment and ammunition data sheet technical manuals (TM) shall be prepared in accordance with MIL-
STD-38784.
3.1.2 Illustrations. Illustrations shall be integrated with text and shall be used when text alone is not
adequate.
3.1.3 Security classification markings. Security classification markings, if applicable, shall be placed on the
front cover and title page, in accordance with DODM 5200.01 volumes 1-4.
3.1.4 Numbering. All numbering (e.g., paragraph, table, figure, etc.) shall be in accordance with
MIL-STD-38784.
3.1.5 Callouts. Callouts on illustrations shall be identified by the nomenclature.
3.1.6 Divisions. The TM shall be divided into volume, chapter, section, and paragraph sequence, as
applicable, in accordance with MIL-STD-38784.
3.2 Content and arrangement. The TM shall consist of the following:
3.2.1 Front matter. As applicable, front matter shall consist of the following in the order specified:
3.2.1.1 Front Cover. The front cover shall contain the publication number, publication type, publication
title, supersedure notice (revisions only), distribution statement, export control notice warning (when
required), destruction notice (when required), service nomenclature, and publication date. See figure 1.
3.2.1.2 Change transmittal page. A change transmittal page shall be prepared for each change and shall list
all pages that have been changed, added, or deleted. See figure 2.
3.2.1.3 List of effective pages. A change transmittal page shall be prepared for the basic version and each
subsequent change or revision. The list of effective pages shall contain the total number of pages in the
publication , a complete list of all pages, and the latest change number of each page. See figure 3.
3.2.1.4 Title page. The title page shall include the reporting errors and recommending improvements
statement (see 3.2.1.3.1) and applicable data shown in figure 4.
3.2.1.5 Reporting errors and recommending improvements statement. A reporting errors and recommending
improvements statement shall be placed on the title page verbatim as shown below.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business