MIL-PRF-63017D(TM)
3.2.4 Rear matter. As applicable, material following the last text page shall consist of the following in the
order specified:
3.2.4.1 Index. As required by the acquiring activity, an alphabetical index shall be prepared in accordance
with MIL-STD-38784.
3.2.4.2 Reporting errors and recommending improvements DA Form 2028. One filled-out sample copy of
DA Form 2028 and a minimum of three blank DA Forms 2028 with the TM number, date, title, and
proponent's address shall be included.
3.2.4.3 Authentication page. The authentication page shall be the last printed text page of the TM.
3.2.4.4 Back cover. The outside back cover shall be blank, except for the Publication Identification Number
(PIN) placed in the lower right-hand corner.
3.3 Classified material. All classified material shall be safeguarded, packaged, and marked in accordance
with DODM 5200.01, volumes 1-4.
4. VERIFICATION
4.1 Verification. Verification shall be as specified by the acquiring activity in the contract or order
(see 6.2).
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or
order (see 6.2). When actual packaging of material is to be performed by DoD or in-house contractor
personnel, these personnel need to contact the responsible packaging activity to ascertain packaging
requirements. Packaging requirements are maintained by the Inventory Control Point's packaging activity
within the Military Service or Defense Agency, or within the military service's system commands.
Packaging data retrieval is available from the managing Military Department's or Defense Agency's
automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not
mandatory).
6.1 Intended use. This specification is used to write/acquire munition equipment and ammunition data sheet
TMs.
6.2 Acquisition requirements. Acquisition documents should specify the following items:
a. Title, number, and date of this specification.
b. Title and publication number of the technical manual (see 3.2.1.1).
c. Type of reproducible copy desired.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business