MIL-DTL-38807D
Print presentation: In lieu of a separate list of illustrations, illustration titles shall be a part of the Table of
Contents. Under the "Chapter 2 Maintenance Parts List" heading in the Table of Contents, the title of
each illustration and its appropriate page number shall be shown.
3.4.2 Foreword. Foreword/preface/introduction requirements of MIL-STD-38784 shall be contained in
Chapter 1, Foreword.
3.4.2.1 List of related publications (LRP). In addition to the requirements of MIL-STD-38784, separate
IPB manuals for accessories, components, assemblies, vendor items, etc., shall be listed. The list shall
include the part number and listed in alphanumeric sequence by part number. Model or type number
shall be used when no part number has been assigned. If applicable, the publication number and title
for a power package buildup manual with IPB shall also be listed.
Electronic print requirement: LRP entries shall be linked to the books which they apply when applicable.
3.5 Chapter 1, Foreword. Chapter 1 shall contain the following:
3.5.1 Model(s) covered. A listing of the models, types, conigurations, modiications, task numbers, and
series or blocks of the end item covered by the manual.
3.5.2 Serialization. The serialization table, when required by the acquiring activity, shall be used to
specify "Useable On" codes (see 6.2h.).
3.5.3 Finding part numbers, illustration, description.
Electronic presentation requirement: An illustrated explanation (see igure 1) shall be included when
MPL contains at least 200 part numbers.
Print presentation requirement: When the MPL exceeds 16 pages, an illustrated explanation (see igure 1)
shall be included to describe:
a. How to ind a part number or description using the Table of Contents and illustration titles.
b. How to ind the illustration or description if a part number or reference designator is known.
3.5.4 Listing of similar assemblies. An explanation of the method used to list parts of similar assemblies
shall be included (see 3.6.9.7).
3.5.5 Parts in kits or quick change units. When repair parts are supplied in the form of kits or quick change
units, an explanation shall be included, and shall include information on determining what parts are included.
3.5.6 Symbols. An explanation of the dash (-) (see 3.6.7.1.4), number sign (#) (see 3.6.9.2 and 3.6.10.3),
3.5.7 Sheet number explanation. If multisheet illustrations are used, an explanation shall be included
that the sheet number follows the index number and is separated with a slash (/) (see 3.6.7.1). The
explanation shall also state that, if an indexed item is on more than one sheet of an illustration, the
irst and last sheet numbers on which the item appears are given.
3.5.8 Useable on codes. Deinitions of the useable on codes used in the MPL of the manual shall be
provided. An explanation that codes are omitted for assemblies and parts installed in all conigurations of
the end items covered in the manual shall be included. Codes shown shall not be limited to the initial
production coniguration of a part or assembly.
3.5.9 Source, Maintenance, and Recoverability (SMR) codes. The following statement shall be included:
"This manual contains Joint Military Service Uniform Source, Maintenance, and Recoverability (SMR)
codes. Deinitions of these SMR codes are available in TO 00-25-195."
3.5.10 Nuclear hardness. If equipment covered has nuclear survivability requirements (for example,
Over Pressure and Burst, Thermal Radiation, Electromagnetic Pulse, or Transient Radiation Effects on
Electronics), all Hardness Critical Items (HCI) shall be marked with
. Unless otherwise speciied by
the acquiring activity, all HCIs shall be marked with the symbol immediately preceding the description
of the item (see 3.6.7.4.1). When approved by the acquiring activity, the symbol **HCI** may be
used in lieu of the boxed HCI symbol (see 6.2i.).
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business