MIL-DTL-38807D
changes or revisions, as applicable, shall incorporate SMR codes approved by the government during
the initial provisioning process
3.6.7.7.1 Multiple Service TMs. . When speciied by the acquiring activity (see 6.2o.), multiple SMR columns
shall be displayed as required. The columns shall appear in the order listed below, as required. The headings
for the SMR code columns shall also contain the appropriate service designation(s): (ARMY), (NAVY),
(USAF), (USMC), (USCG). Each service shall identify the appropriate SMR code entry in their designated
column. When services share the same SMR code for an item, the SMR code shall be listed for each service.
When supported by the viewing system, only the SMR codes applicable to the user may be displayed.
3.6.8 Layout. Electronic presentation: In IPBs only the graphic(s) shall appear in the center pane and
the MPL (text) shall appear in the right pane.
Print presentation : Whenever the size of an illustration and the length of its corresponding parts list warrant,
the MPL shall be laid out so that a full-page illustration is on the left-hand page and the applicable parts list
is on the right-hand facing page. Whenever a smaller illustration and parts list length permits, the illustration
and parts list shall be placed on the same page; the illustration may be placed above or below the parts list.
3.6.9 Subjects requiring special attention.
3.6.9.1 Standard items and standard part. Government standard items and parts shall be identiied by the
assigned government standard part number and CAGE code. Part numbers, design activity codes, and
complete descriptions are required for industry and contractor standard items and parts. When an item is part
of an assembly and covered in the intermediate level IPB, it must be shown in the aircraft IPB if it is
SMR coded for organizational level maintenance.
3.6.9.2 Government Furnished Equipment (GFE) and Contractor Furnished Equipment (CFE) covered by
separate manuals. The item and attaching parts shall be listed for both GFE and CFE. Other detail parts
shall not be listed. Following the part number of the GFE/CFE item, a number sign (#) shall be
inserted lush right to indicate that detail parts are listed in a separate manual. Chapter 1 shall include
an explanation that the number sign signiies that detail parts are listed in a separate manual and the
publication number is in the list of applicable technical manuals.
3.6.9.3 Vendor Parts (including commercial hardware). When vendor items are used exactly as manufactured,
and are not selected or source controlled, vendor part numbers shall be listed. When a separate IPB is
available for a vendor item, the requirements of 3.6.9.2 are applicable.
3.6.9.4 Altered, selected, or source controlled items. When a government standard, industry standard,
vendor, or commercial item is altered, selected, or source controlled, the part number of the design activity
responsible for the alteration, selection, or source control shall be listed in the part number column.
3.6.9.5 Oversize and undersize parts. The description of oversize and undersize parts shall include dimensions.
3.6.9.6 Matched parts. When parts are manufactured as a matching set (lapped assembly, electronic,
etc.) to meet certain requirements, the description of the part shall be coded or annotated that the
parts must be requisitioned as a set.
3.6.9.7 Similar assemblies. When similar assemblies contain 51 percent or more identical parts, the
assemblies shall be combined and listed as follows; otherwise the assemblies shall be listed separately.
a. All the assemblies (igure and index numbers, part numbers, description, quantities, codes) shall
be listed irst, followed by the detail parts.
b. A part, common to all assemblies in the same quantity, shall be listed once and the quantity per
assembly designated.
c. A part, common to all assemblies in differing quantities, shall be listed once for each quantity,
and be identiied to which assembly each listing pertains, by use of a useable on code.
d. Peculiar parts shall be listed once, and be identiied to which assembly each pertains by
use of a useable on code.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business