MIL-DTL-38807D
3.5.10.1 Nuclear hardness symbol explanation. Chapter 1 shall include a listing and explanation of the HCI
symbol and other pertinent information, as necessary, to emphasize the uniqueness of hardness features. This
shall include an explanation that the HCI symbol establishes special requirements limiting changes and
substitutions, and that the speciic parts listed must be used to ensure hardness is not degraded. This
statement shall be preceded by a CAUTION heading. All changes to, or proposed substitutions of, HCIs
must be approved by the acquiring activity (see 6.2j.).
3.5.11 Electrostatic Discharge Sensitive (ESDS) parts. If equipment covered contains ESDS parts, they
shall be marked as shown in TO 0025234 (see igure 8). Unless otherwise speciied by the acquiring
activity, all ESDS parts shall be marked with the ESDS symbol immediately preceding the description
of the item (see 3.6.7.4a.). When approved by the acquiring activity, the symbol **ESD** may be
used in lieu of the ESDS symbol (see 6.2k.).
3.5.11.1 ESDS symbol explanation. Chapter 1 shall include a listing and explanation of the ESDS
symbol: Other pertinent information shall be included as necessary to emphasize the uniqueness of ESDS
parts. This shall include an explanation that the ESDS symbol requires that all ESDS parts be handled
in accordance with the ESDS device handling procedures in TO 00-25-234. This explanation shall
be preceded by a CAUTION heading.
3.5.12 Parts standardization. The following paragraph shall be included in the foreword chapter:
"Parts Standardization. Authority for use of a part number different than the part number listed in
this IPB is established by the Department of Defense (DoD) Interchangeability and Substitution
(I&S) Program. Refer to the DO43B Master Item Identiication Base for Air Force I&S information.
The maintenance technician has inal responsibility and authority for determining acceptability
of substitute parts."
3.5.13 Manufacturers list. When required by the acquiring activity, a manufacturers list shall be provided
(see 6.2l.). The list shall contain the Commercial and Government Entity (CAGE) code and the name and
address of all manufacturers whose CAGE codes are referenced in the MPL.
3.6 Chapter 2, Maintenance parts list. The MPL shall contain:
a. A breakdown of the assemblies and parts contained in the end item(s) or sold to the government
as a peculiarly conigured spare. These assemblies can be disassembled, repaired, obtained from
reclamation, manufactured, reinstalled, replaced, or reassembled, in agreement with government
assigned Source, Maintenance, and Recoverability (SMR) coding (see 3.6.5 for exceptions). The
listings shall follow the same sequence they are discussed in the applicable maintenance manual.
If the maintenance manual discusses the compressor, augmenter, and accessories, in that sequence,
the MPL shall list these components and their detail parts in the same sequence (see 3.6.7
for additional information on the sequence of listing parts).
b. Oversize and undersize parts, attaching parts, undrilled/untrimmed parts, repair parts kits, quick
change units, decalcomanias, markings, etc.
c. Special support equipment, other than test equipment, which must be designed and developed in
conjunction with development of the end item. Be locally manufactured for use with the end item
for which no separate IPB manual has been procured. When such equipment is source coded MO,
MF, or MD in the SMR column, the drawing number shall be included in the description column.
d. Identiication of all HCI and ESDS components using the appropriate symbols (see 3.5.10
and 3.5.11).
3.6.1 Margin data.
Margin data shall be in accordance with the requirements of MIL-STD-38784.
Electronic presentation: When applicable, the SSSN shall be displayed in the header bar above the
text pane containing the MPL.
Print presentation: When the MPL is to be used in conjunction with MIL-PRF-83495 type manuals, the
MPL shall display the applicable SSSN, in 18 point type, in the lower outer corner of each page. The
SSSN shall be placed directly above the page number.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business