MIL-DTL-5288J
e. Cargo doors. Cargo doors shall be identiied and any pertinent features described, including
limiting dimensions.
f. Cargo tiedown ittings. Cargo tiedown ittings shall be described listing type, strength ratings
(specify design limit or ultimate), and location in the cargo area, including stowage locations,
when applicable. Identifying color codes and markings shall be explained.
3.2.3.3 Aircraft cargo aids. Where applicable, a description of aircraft cargo loading and off-loading aids,
and cargo securing equipment shall include, but not be limited to, the following:
a. Auxiliary ramps/bridges.
b. Beveled step-up shoring.
c. Splice plates.
d. Cargo ramp support stand.
e. Cranes/hoists.
f. Snatch blocks.
g. Pulleys.
h. Winches.
i. Tiedown devices.
j. Roller conveyors/ball transfer pads.
k. Guide/restraint rails.
l. Tail support devices.
m. Pry bars.
3.2.3.3.1 Cargo aid stowage. Stowage provisions shall be described for all cargo aids which are
carried on the aircraft.
3.2.4 Chapter 3 Aircraft coniguration. This chapter shall be arranged to present all information
necessary for aircraft preparation, functional checks and step-by-step installation instructions for the
following aircraft equipment:
a. Tail supports, ramps, and doors.
b. Restraint rails and roller conveyors.
c. Sidewall and centerline seats.
d. Stanchion kit.
e. Litter provisions.
f. Rigid aft or forward facing seats, troop seats, safety belts, and harnesses.
g. Oxygen system.
h. Crane and winch.
i. Load assist devices.
j. Support jacks.
k. Airdrop systems installation.
l. Cargo tiedown ittings.
3.2.5 Chapter 4 General procedures. This chapter shall contain general instructions relative to load
preplanning/planning, loading, postloading, off-loading, and winching/hoisting procedures (charts, scales,
drawings, etc.). The data and information presented in this chapter shall pertain to cargo which can be
loaded and transported in the aircraft without the use of special handling procedures such as those
discussed in 3.2.7. Unless otherwise speciied by the acquiring activity (see 6.2), Chapter 4 shall be
divided into ive sections as follows:
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business