MIL-DTL-81919C(AS)
e. Illustrations of scope displays when required for clear understanding of the test.
f. Test values of permissible tolerances.
g. Adjustments required during test, such as regulating component gain, signal level or
adjusting pressures.
h. Instructions to replace components, for example: "Replace O2AR2". Reference shall be
made to the location of the replacement instructions.
i. If logic tree troubleshooting format is prepared, the testing shall be presented so that the
technician may conveniently refer to the applicable portion of the logic tree to perform
required troubleshooting. If a fault logic text format is prepared, the procedure shall be
integrated within the test.
j. Supporting documents, or reference to supporting documents, such as schematics, wiring
diagrams, and wire lists.
3.3.4 Preparation for storage or shipment. Preparation for storage and/or storage
instructions shall be provided when special storage requirements are applicable. Only special
instructions or precautions relative to storage procedures such as corrosion prevention, draining
fluids, or purging which are peculiar to the component/equipment, shall be included.
a. Standard packaging procedures contained in other manuals and related documentation
shall not be included, but shall be referenced. Packaging and preservation requirements
for Naval Inventory Control Point (NAVICP) and NAVAIR repairable assemblies shall
reference NAVSUP 701 (or NAVSUP 700), as applicable.
b. Preparation for shipment, when a special shipping container is used, shall be provided.
c. Refer to NAVAIR 01-1A-23 (WP 005 00) for handling when an item is ESD sensitive.
3.3.5 Maintenance with IPB. The functional element of maintenance with IPB includes all of
the following maintenance tasks, as applicable:
3.3.5.1 General coverage requirements. These may be provided as separate WPs or as
integrated maintenance procedures, depending on the depth and scope of the required coverage.
a. General maintenance procedures. See MIL-DTL-81927.
b. SE maintenance instructions. (See 3.2.6.) When requested, SE maintenance instructions
may be provided, when not covered by another manual.
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business