MIL-DTL-87929 Technical Manuals, Operation And Maintenance Instructions In Work Package Format \(For Usaf Equipment\)This detail specification covers the requirements for preparation of equipment Operation and Maintenance \(O&M\) Technical Manuals \(TM\) in Work Package \(WP\) and Subordinate Work Package \(SWP\) formats. Manuals, using the WP and SWP concept described within this specification, are intended for use at Intermediate and Depot levels on all equipment and at Organizational level for equipment not using the MIL-PRF-83495 maintenance manual concept. This specification provides for Standard Generalized Markup Language \(SGML\) Document Type Definitions \(DTD\) usage \(see appendices A.1 through L\) required for electronic data delivery. All Appendices are intended for compliance when required.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18

MIL-DTL-87929D

APPENDIX I

I.3.5.3.2 Common tools.

The following paragraph shall be included:

"A substitute item may be used in place of any common tool if the use does not degrade the

condition and reliability of the material or safety of operation."

I.3.5.3.3 Electrical and pneumatic power requirements. Electrical and pneumatic power requirements for

special tools, test equipment, and support equipment shall be given. As a minimum, voltage, type,

frequency, and tolerance shall be stated for electrical requirements, and operating pressure/vacuum and

low demand for pneumatic requirements.

I.3.5.3.4 Master list of special tools. The list of special tools shall be in accordance with MIL-DTL-87929,

3.4.3.3.1, with the following exceptions. The Part No. column shall be titled "Part/Speciication No." and the

part or speciication number, as applicable, shall be included. Alternate items shall be listed immediately

following the item for which it is an alternate. Alternate items shall be identiied as alternate in the use

column. Unless otherwise speciied, special tools shall be illustrated in this WP (see I.6.2).

I.3.5.3.5 Master list of test equipment. The list of test equipment shall be in accordance with

MIL-DTL-87929, 3.4.3.3.2 except the "Type Designation" column shall be titled "Part No." and the part

number shall be used. Unless otherwise speciied, test equipment shall be illustrated in this WP (see I.6.1).

I.3.5.3.6 Master list of support equipment. The list of support equipment shall be arranged in the

following format. If an alternate item of support equipment can be used, it shall be listed immediately

following the item for which it is an alternate, and be identiied as an alternate in the Use column. When

speciied, support equipment shall be illustrated in this WP (see I.6.1).

Master List of Support Equipment

Use

Part No. / NSN

CAGE Code

Figure Number

Nomenclature

a. Part No./NSN. Support equipment shall be listed in alphanumeric sequence by part number

or National Stock Number; except alternate items shall be listed immediately following the

item for which it is an alternate.

b. CAGE Code. The CAGE code or manufacturers name and address if code is not available.

c. Figure Number. The igure number in this WP which illustrates the item. If the item is not

illustrated, the statement "Not Illustrated" shall appear in this column.

d. Nomenclature. Nomenclature shall be in accordance with the requirements of MIL-PRF-38784.

e. Use. A brief statement indicating the use of the item shall be provided in this column.

I.3.5.3.7 Master list of safety and protective devices. The list of safety and protective devices shall

follow the list of support equipment and shall be arranged as follows (requirements for each column

are the same as I.3.5.3.6a. through I.3.5.3.6e.):

Master List of Safety and Protective Devices

Use

Part No. / NSN

CAGE Code

Figure Number

Nomenclature

I.3.5.3.8 Master list of consumables.

The list of consumables shall be in accordance with MIL-DTL-87929

(see 3.4.3.3.3).

I.3.5.4 Storage and Handling Requirements WP (WP 040 00).