MIL-PRF-63004D(TM)
2.3 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in the document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 Incorporation of LOs into a technical manual. LOs shall be incorporated into the associated
technical manual (TM) in accordance with MIL-STD-40051-1 or MIL-STD-40051-2 in the
following instances:
a. If the LOs are classified as confidential or higher (incorporate into TM of the same or
higher security classification).
b. If specified by the contracting activity.
3.2 Format.
3.2.1 LO card types. Lubrication order cards shall be either single-fold or flat.
a. Single-fold card. LO(s) requiring no more than a single card shall be printed in a
single-fold card style and shall be folded at the center. Single-fold LO(s) shall have no lettering,
leader lines, or critical portions of illustrations closer than 1/4 inch from either side of the fold.
b. Flat card. Flat cards shall be used for LOs with more than one card. Flat card LO(s)
shall not be folded.
3.2.2 LO card sizes . Unless otherwise specified by the contracting activity, the sizes, in inches
shall be as shown below:
TABLE I. LO Card Sizes.
LO Card
Size of
LO Image Size
Size of LO
LO (Flat)
(Single-Fold)
A
4 1/4 x 8 1/2
3 1/4 x 7 1/2
N/A
B
8 1/2 x 8 1/2
7 1/2 x 7 1/2
4 1/4 x 8 1/2
C1
6 1/2 x 9 1/2
5 5/16 x 8 3/4
N/A
D
8 1/2 x 11
7 1/4 x 9 3/4
N/A
E
17 x 11
14 x 9 1/2
8 1/2 x 11
Notes:
1. Use in conjunction with operators log book manual.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business