MIL-PRF-63004D(TM)
3.2.3 LO number. The LO number shall appear on the first card in accordance with paragraph
3.3.1. The LO number shall appear at the top of all other cards.
3.2.4 LO Card numbering. Unless otherwise specified by the contracting activity, the card
number shall be centered at the bottom of the card. Each printed side of a card shall be
numbered sequentially. Each side shall reflect the relationship of that side to the total number of
printed sides. For example, 1 of 4; 2 of 4; 3 of 4; and 4 of 4. If only one side of a card is printed,
it shall be numbered 1 of 1.
3.3 Title page (first card) contents. The title page shall contain the LO number, a heading, title,
national stock number (NSN), part number, commercial and government entity code (CAGEC),
the end item code, a reference line, reporting errors information, distribution statement/export
control warning/destruction notice, and location of the LO statement. See FIGURE 1 for
example of title page (first card).
3.3.1 Heading. The heading shall consist of the words "LUBRICATION ORDER," date
printed, the LO number, and a supersession notice (if applicable), formatted as shown in
FIGURE 1.
3.3.2 Title. The title shall appear below the heading and read the same as the title on the related
technical manual (TM). When more than one piece of equipment is covered by the LO, the title
for each shall appear separately.
3.3.3 NSN, part number, CAGEC, and EIC. The applicable NSNs, part numbers, CAGECs, and
EICs for each piece of equipment covered by the LO shall be entered beneath the title(s).
3.3.4 Reference line. A reference line consisting of the publication number(s) of the related
TMs shall be placed below the title within the applicable area.
3.3.5 Reporting errors. LO cards shall contain a Reporting Errors and Recommending
Improvements Statement.
3.3.6 Location of the LO statement. The following statement shall be included on the title page
of the LO:
"Copy of this lubrication order will remain with the equipment at all times; instructions
contained herein are mandatory."
3.3.7 Distribution statement, export control warning, and destruction notice. A distribution
statement, export control warning, and destruction notice shall be placed on the first card in
accordance with MIL-STD-40051-2.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business