MIL-DTL-5096G
NOTES
6
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. Technical manuals, work cards, and charts prepared in accordance with this speciication
are intended for use by Air Force organizational, intermediate and depot maintenance activities as a guide
for performing preventative maintenance (i.e., isochronal, programmed depot maintenance, combined type,
etc.) found in the TO 00-20-series technical manuals, on Air Force equipment. FCF manuals and checklists
are intended to be used to ensure the aircraft (equipment) is it for light (use). Checklists are intended to
be used by operations and maintenance personnel to ensure that no step is overlooked. The military unique
requirements for the technical data covered by this speciication are contained in 00-20-series TOs.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this document.
b. Types of manuals required (see 3.1).
c. If more than one inspection and maintenance requirements manual may be prepared (see 3.2.1).
d. Maximum safe interval between inspections of weapon system (see 3.2.1.1).
e. Basis for inspection and maintenance requirements (-6) manual (see 3.2.1.1.2).
f. If component coverage will be other than as speciied in this document and, if so, items
exempt from coverage (see 3.2.1.7).
g. If additional information applicable to a speciic weapon system or any modiications to the
foreword is required (see 3.2.2.1).
h. If any speciied sections in chapter 1 of inspection and maintenance requirements (-6) manual will
not be used (see 3.2.2.2).
i. If additional sections in chapter 1 of inspection and maintenance requirements (-6) manual will
be included and type required (see 3.2.2.2).
j. Inspection concept (periodic, phased, or isochronal) to be used (see 3.2.2.2.6).
k. If any speciied sections in chapter 2 of inspection and maintenance requirements (-6) manual will
not be used (see 3.2.2.3).
l. If additional sections in chapter 2 of inspection and maintenance requirements (-6) manual will
be included and type required (see 3.2.2.3).
m. Items and components that must be removed and changed for new or overhauled like items at
the expiration of a speciied number of lying hours, expiration of a number of cycles, or
an interval of calendar time (see 3.2.2.4).
n. Selection of items to be listed in Chapter 4, Section I - Base Level Restrictions (see 3.2.2.5.1.1).
o. If a functional check manual for equipment other than aircraft will be prepared (see 3.3).
p. If sample completed checklists will be included in the acceptance and functional check light
(-6CF) manual (see 3.3.1.3).
q. If the distribution statement for the acceptance and functional check light checklist will be other
than as speciied in this document (see 3.4).
r. If the test light proile will be included in the acceptance and functional check light
checklist (see 3.4.3).
s. If the acceptance and functional check light checklist will be prepared for printing on one
side only (see 3.4.3).
t. If the prelight/preoperation inspection will be combined with the basic postlight/postoperation
(periodic or phased concept)/thrulight (isochronal concept) inspection (see 3.6.1).
u. If workcards will be arranged other than head to head (see 3.6.2).
v. If deviations are required for inspection requirements (see 3.6.3.3).
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business