systems equipment, rockets and electronic systems\). Some systems may require an inspection requirements manual only, or work cards only. For other systems a combination of both inspection manual and work cards may be more suitable. This specification provides for electronic delivery of data through the use of the Document Type Definitions \(DTD\) listed in Appendixes A through F. \(Appendix E has been deleted.\)

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22

MIL-DTL-5096G

This detail speciication is approved for use by the Department of the Air Force and is available for use

by all Departments and Agencies of the Department of Defense.

SCOPE

1.1 Scope. This detail speciication covers the requirements for the preparation of inspection and maintenance

requirements (-6) manuals, acceptance and functional check light procedures (-6CF) manuals, functional

check light (-6CL) checklists, and inspection (-6WC) work cards. This detail speciication also covers the

general requirements for all checklists, and speciic requirements for maintenance checklists (as applicable to

aircraft, Communication Electronic (CE) equipment, air/ground launched missiles, drones, support/systems

equipment, rockets and electronic systems). Some systems may require an inspection requirements manual

only, or work cards only. For other systems a combination of both inspection manual and work cards may

be more suitable. This speciication provides for electronic delivery of data through the use of the Document

Type Deinitions (DTD) listed in Appendixes A through F. (Appendix E has been deleted.)

1.2 Detail. The level of detail contained in this detail speciication is necessary to comply with the

requirements of the Joint Computer-Aided Acquisition and Logistics Support (JCALS) system.

APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are speciied in sections 3, 4, or 5 of this speciication.

This section does not include documents cited in other sections of this speciication or recommended for

additional information or as examples. While every effort has been made to ensure the completeness of this

list, document users are cautioned that they must meet all speciied requirements of documents cited in

sections 3, 4, or 5 of this speciication, whether or not they are listed.

2.2 Government documents.

2.2.1 Speciications, standards, and handbooks. The following speciications, standards and handbooks form

a part of this document to the extent speciied herein.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-DTL-7700

Manuals, Flight

MIL-DTL-83495

Manuals, Technical, On Equipment Set, Organizational Manuals:

Detailed Requirements for Preparation of

MIL-DTL-87268

Interactive Electronic Technical Manuals - General Content, Style,

Format, and User-Interaction Requirements

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-1808

System/Subsystem/Subject Number (SSSN) Numbering System

MIL-STD-1798

MECHANICAL EQUIPMENT AND SUBSYSTEMS INTEGRITY

PROGRAM

MIL-STD-38784

Manuals, Technical: General Style and Format Requirements

(Copies of these documents are available online at https://quicksearch.dla.mil/ or from the Standardization

Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2.2 Other Government documents, drawings, and publication. The following other Government documents,

drawings, and publications form a part of this document to the extent speciied herein. Unless otherwise

speciied, the issues of these documents are those cited in the solicitation or contract.

AIR FORCE TECHNICAL MANUALS

TO 00-5-3

AF Technical Order Life Cycle Management

TO 00-20-series

Maintenance Management Series

TO 42B1-1-15

Cross Reference-NATO Interchangeability of Aviation Fuels,

Lubricants and Allied Products