MIL-DTL-85383A(AS)
a. Nomenclature.
b. Government specification number or commercial identification.
c. Application.
3.3.2.2 Protective covers. Protective covers required for corrosion control shall be identified,
and procedures shall be included for installation on the aircraft. Illustrations shall be included as
necessary.
3.3.2.3 Corrosion prone areas. Those areas on the aircraft which are particularly susceptible
to corrosion shall be identified. Illustrations and tables shall be prepared as necessary to aid in
locating and identifying corrosion prone areas. Informational charts, when necessary, shall be
obtained from the Cognizant Field Activity (CFA).
3.3.3 Corrosion control practices. Corrosion control in most cases consists of a method for
interrupting the corrosion cycle. General manuals available to maintenance personnel adequately
cover the theoretical aspects of conditions leading to corrosion. The aircraft corrosion control
manual/volume shall contain specific data required to protect a particular aircraft from damage by
corrosion. Informational charts obtainable from the CFA should be used as supplemental source
data.
3.3.3.1 Corrosion control data contained in other manuals. When corrosion control data
contained in general manuals is acceptable for use, this data shall be referenced as specified in
MIL-DTL-81927 (see 3.1.4).
3.3.3.2 Typical corrosion control data. Typical corrosion control data is that data which is
applicable to more than one of the structural groups or components separately covered in the
manual. To avoid unnecessary duplication, typical corrosion control data shall be presented in
separate WPs and referenced as needed.
3.3.3.3 Inspection for corrosion. Data, illustrated as necessary, shall be prepared for
inspecting aircraft structure and components for corrosion and damage from corrosion.
Inspection data shall include the following as applicable:
a. Cleaning procedures.
b. Inspection by methods appropriate to the area on the aircraft.
c. Reference to applicable NDI manuals for appropriate procedures when required.
d. Criteria for recognizing and evaluating corrosion damage.
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business