MIL-DTL-87929D
APPENDIX I
8. Other Inspections (e.g., Pre-Flight, Post-Flight, Recertiication, etc.) (see I.3.5.5.1.8)
b. Inspection Evaluation (see I.3.5.5.2)
c. Instructions for disposition of rejected items (see I.3.5.5.3)
d.
Classiication of visual defects tables (see I.3.5.5.4)
I.3.5.5.1 Types of inspections.
I.3.5.5.1.1 Receiving inspection (RI). General inspection guidelines are contained in TO 11A-1-10 and
shall be used as a guide to establish inspection criteria. Checkpoints required to perform inspection shall be
presented in the classiication of defects table.
I.3.5.5.1.2 Shipping inspection (SI). General inspection guidelines are contained in TO 11A-1-10 and shall
be used as a guide to establish inspection criteria. Checkpoints required to perform inspection shall be
presented in the classiication of defects table.
I.3.5.5.1.3 Periodic inspection (PI). General inspection guidelines are contained in TO 11A-1-10 and
shall be used as a guide to establish inspection criteria. Periodic inspection intervals will be established
by the acquiring activity (see 6.2.j.8.(l)). Inspections shall be performed on a sample-size basis. Unless
otherwise speciied by the acquiring activity, inspection quantities shall be based upon sample-size reject
table(s) listed in TO 11A-1-10. Inspection criteria shall be presented in the classiication of visual defects
table which shall include all checkpoints necessary to ensure serviceability of the item(s). Specify items
which are exempt from this inspection, if applicable. If inspection of inert training items is different
than that required for live items, indicate inspection requirements.
I.3.5.5.1.4 Special inspections (SPI). Special inspections may be performed by direction of local authority,
major commands, or appropriate ALC. Special inspections shall be performed in accordance with speciic
instructions from the directing authority.
I.3.5.5.1.5 Preissue inspection (PII). Inspections shall provide data required to ensure serviceability of an
item prior to issue. General inspection guidelines are contained in TO 11A-1-10 and shall be used as a
guide to establish inspection criteria. Speciic inspection procedures shall be as directed in TO 11A-1-10.
I.3.5.5.1.5.1 Priority of issue. Priority of issue information shall contain notes pertaining to established
and/or indeinite shelf life items. The following note for established shelf life items shall read: "When the
lot number or date of manufacture cannot be identiied, an item shall not be issued. If either the lot number
or date of manufacture is known, the other may be obtained from (insert appropriate commodity directorate
(OO-ALC/LIW or WR-ALC/LKG)." The following note for indeinite shelf life items shall read: "When
the lot number cannot be identiied, an item shall not be issued. Missing date of manufacture is not
signiicant and shall not be cause for classifying the item unserviceable for issue. If only the lot number or
date of manufacture is known and the unknown information is needed, it may be obtained from (insert
appropriate commodity directorate [OO-ALC/LIW or WR-ALC/LKG])."
I.3.5.5.1.6 Returned munitions inspection (RMI). This inspection shall be performed on munitions returned
from custody/consumption accounts prior to return to base stock (FV/FK). TO 11A-1-10 shall be used as a
guide to establish inspection criteria. Speciic inspection procedures shall be as directed in TO 11A-1-10.
I.3.5.5.1.7 Storage monitoring inspection (SMI). Storage monitoring inspections are performed to
measure/monitor speciic conditions or characteristics of stored assets. The inspection shall include
all instructions necessary to accomplish this inspection. Criteria and guidelines are contained in TO
11A-1-10 and shall be used.
I.3.5.5.1.8 Other inspections. When speciied, other inspections shall be included. The acquiring activity
will specify the categories and types of inspections required (see I.6.2).
66
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business