MIL-DTL-23618H(AS)
n. Illustration cards (see 3.3.27).
o. QA cards (see 3.3.31).
3.3 Card formats. Card formats shall be limited to those described in the following
paragraphs. The cards shall be prepared to fit on a 5 x 8 card format. The image area (4 x 7
inches) shall be centered on the card and may be boxed. The normal marginal copy shall be 1/2-
inch all around the image area. A 5/8-inch space measured from the top edge of the card down to
the top of the lettering shall be established to allow for drilling holes, if required. The appropriate
subparagraphs under 3.3 identify the card formats which are authorized for use in each type
PMRM.
3.3.1 Title card.
3.3.1.1 Title card format details.
a. Publication number. The publication number assigned by the requiring activity shall be
placed in the upper right corner of the card in large bold type.
b. Type of document. The words "TECHNICAL MANUAL" shall be centered in the upper
portion of the card in large bold type.
c. Publication title. The publication title shall consist of the type of manual and the end item
nomenclature:
(1) Type of manual. (See 3.2.) The type of manual is a combination of the type(s) of
coverage, if applicable, and functional element(s) contained in the manual, e.g.,
"PHASED MAINTENANCE REQUIREMENTS MANUAL", "DAILY
INSPECTION MANUAL", "DAILY INSPECTION/SERVICING MANUAL" or
other types of manuals, as identified in this specification. The type of manual shall be
centered on the card below the type of document in large bold type.
(2) End item nomenclature. The end item nomenclature such as the weapon system or
equipment (including AN type designation), shall be centered below the type of
manual in large bold type. Spacing shall be determined by the number of additional
items required on the title page. When applicable, the model(s), and part number(s)
shall be placed below the nomenclature. The model(s) and part number(s) shall be in
large bold type. If the manual covers more than one model and/or part number and
space considerations so dictate, the entries may be made in normal bold type,
depending on the number of entries. For PSE PMRMs, the type/model of the aircraft
applicable shall be followed by "PECULIAR SE."
51
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business