MIL-DTL-23618H(AS)
be provided. The user is directed to refer to the corresponding numeric identifier listed below for
the complete warning applicable to the hazardous material."
b. Complete warnings shall be provided for all hazardous materials addressed in the manual.
The caption "HAZARDOUS MATERIALS WARNINGS" shall be centered on the first
full page following the introductory paragraphs. The column headings "Index",
"Material", and "Warning" shall appear below the caption.
3.3.4.1.1 Hazardous materials referenced in text. In the text of the manual (not to include
checklists), the WARNING caption shall not be used for hazardous materials. Such warnings
shall be identified by an icon, nomenclature of the material and a numeric identifier (see 3.1.7b and
3.1.7c). Complete warnings for each hazardous material shall be provided on the HMWS cards.
3.3.5 Checklist title/introduction and application pages. The checklist shall be prepared to fit
on 3-1/2 x 5-1/2 inch folded pages. The checklist image area shall be 3 x 5 inches. The normal
marginal copy (blank area) shall be 1/4 inch all around. The introduction and application
statements shall be integrated on the title pages of the following checklists. The statements may
be presented as prescribed herein for each of the respective checklists. The format shall contain
the following information in normal type:
a. Publication number. The publication number assigned by the requiring activity shall be
placed in the upper right corner of the card in large bold type.
b. Publication title. The publication title shall be centered below the publication number in
large bold type and consist of the following:
(1) Type of manual. (See 3.2.) The type of manual is a combination of the type(s) of
coverage, if applicable, and functional element(s) contained in the manual, e.g.,
"TURNAROUND CHECKLIST", "PREOPERATIONAL CHECKLIST", or other
types of manuals, as identified in this specification.
(2) End item nomenclature. The end item nomenclature such as the weapon system or
equipment (including AN type designation), shall be centered below the type of
manual. Spacing shall be determined by the number of additional items required on the
title page. When applicable, the model(s), and part number(s) shall be placed below
the nomenclature. For PSE PMRMs, the type/model of the aircraft applicable shall be
followed by "PECULIAR SE."
c. Type equipment code. The type equipment code shall be centered below the
manufacturer's name on publications applicable to SE, PSE (if applicable), surface or
aerial targets, and airborne armament equipment or special stores.
55
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business