MIL-DTL-23618H(AS)
d. Type equipment code. The type equipment code shall be centered below the
manufacture's name on publications applicable to support equipment, PSE (if applicable),
surface or aerial targets, and airborne armament equipment or special stores.
e. Supersedure notice. When a manual is revised, a supersedure notice shall be centered
below the end item nomenclature or type equipment code in normal bold type. The notice
shall include the superseded publication number and its date plus all previously
incorporated Rapid Action Change (RAC) numbers. For example; "This manual
supersedes NAVAIR 17-600-117-6-2 dated 1 March 1980 through Change 2 dated 11
April 1981 including previously incorporated RACs 1 through 8." The notice shall be
deleted upon incorporation of the first change to the revised manual. If a classified manual
is being revised, the supersedure notice shall add the following statement, "which shall be
destroyed in accordance with applicable security regulations."
f. Interim Rapid Action Change (IRAC) incorporation notice. A notice that an IRAC has
been incorporated, if applicable, shall be centered below the nomenclature or type
equipment code.
g. Distribution statement. The distribution statement shall be presented on all title cards as
follows:
"DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government
agencies and their contractors to protect publications required for official use or for
administrative or operational purposes, determined on (date). Other requests for this
document shall be referred to Commanding Officer, Naval Air Technical Services Facility,
700 Robbins Avenue, Philadelphia, PA 19111-5097. The determination date shall be the
date of the publication (basic, revision, change date, as applicable) when the distribution
statement is applied. If the distribution statement is changed, the determination date will
be the date of the issue that effected the change."
h. Destruction notice. The destruction notice shall be placed directly below the distribution
statement and shall read as follows:
(1) For unclassified manuals:
"DESTRUCTION NOTICE. For unclassified, limited documents, destroy by any method
that will prevent disclosure of contents or reconstruction of the document."
(2) For classified manuals:
"DESTRUCTION NOTICE. For classified documents, follow the procedures in DOD
5220.22-M, Industrial Security Manual, Section II-19 or DOD 5200.1-R, Information
52
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business