MIL-DTL-23618H(AS)
d. Supersedure notice. When a manual is revised, a supersedure notice shall be centered
below the end item nomenclature or type equipment code in normal bold type. The
notice shall include the superseded publication number and its date plus all previously
incorporated RAC numbers (for example, "This manual supersedes NAVAIR 17-600-117-
6-2 dated 1 March 1980 through Change 2 dated 11 April 1981 including previously
incorporated RAC's 1 through 8.)" The notice shall be deleted upon incorporation of the
first change to the revised manual. If a classified manual is being revised, the supersedure
notice shall add the following statement, "which shall be destroyed in accordance with
applicable security regulations."
e. IRAC incorporation notice. A notice that an IRAC has been incorporated, if applicable,
shall be centered below the nomenclature or type equipment code.
f. Abbreviated distribution statement. This statement may be expressed as follows:
"DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government
agencies and their contractors, determined on (date)."
g. Abbreviated destruction notice. This notice may be expressed as follows:
(1) For unclassified manuals:
"DESTRUCTION NOTICE. Destroy by any method that will prevent disclosure of
contents or reconstruction of the document."
(2) For classified manuals:
"DESTRUCTION NOTICE. Follow procedures in Chapter 17 of OPNAVINST 5510.1."
h. Authority notice. The publishing approval authority statement shall be presented in capital
letters as follows:
"PUBLISHED BY DIRECTION OF THE COMMANDER, NAVAL AIR SYSTEM
COMMAND"
i. Introduction statement. (Refer to specific application, 3.3.6 through 3.3.8.)
j. Application statement. (Refer to specific application, 3.3.6 through 3.3.8.)
k. Publication date. The publication (issue) date or revision date shall be placed in the lower
right corner of the first page in large bold type. The right margin shall be aligned with that
of the publication number. The publication date shall be the copy freeze date.
56
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business