MIL-DTL-24784/14B(SH)
3.6.3.8.5 Unpacking and repacking. Include information supplemental to the installation
drawings regarding unpacking and repacking. Include step-by-step procedures to prevent damage
to the equipment or injury to personnel. Supporting illustrations shall be provided to clarify
procedures. When packing for reshipment is required, step-by-step procedures for packing shall
be included and illustrated. When packing is simply the reverse of unpacking, this fact need only
be stated. Any special environmental conditions required for storage shall be provided.
Instructions shall be included for items in the following categories:
a.
Depreservation procedures required at time of installation.
b.
Represervation packaging required prior to repacking for storage or shipment.
c.
Intricate mounting, blocking, or bracing.
d.
Special cushion inserts.
e.
Repairable items.
f.
Sensitive or fragile components.
g.
Items held in special cradles.
h.
Items furnished in reusable containers.
i.
Special environmental conditions required for storage.
j.
Special handling procedures required.
k.
Container storage or disposition instructions, as applicable.
The instructions shall be detailed to prevent handling damage to the equipment or injury to
personnel. In addition, step-by-step procedural illustrations may be used to supplement the
packing and handling instructions.
3.6.3.8.6 Preparation of foundations. Include information supplemental to the installation
drawings. If all foundation preparation information is contained on the installation drawing, refer
to the drawings by figure number.
3.6.3.8.7 Input requirements. A summary of the input data contained on the installation
drawings shall be included. Parameters with tolerances should be included with each of the inputs
listed. Examples of inputs are as follows:
a.
Power.
b.
Ventilation.
c.
Dry air (waveguide pressure).
d.
Ship gyro information.
e.
Fluid cooling.
f.
Steam.
g.
Freon.
3.6.3.8.8 Installation procedures. The following types of supplemental information which are
not provided on the installation drawings shall be included or referenced:
a. Instructions required to assemble units.
22
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business