MIL-DTL-87929 Technical Manuals, Operation And Maintenance Instructions In Work Package Format \(For Usaf Equipment\)This detail specification covers the requirements for preparation of equipment Operation and Maintenance \(O&M\) Technical Manuals \(TM\) in Work Package \(WP\) and Subordinate Work Package \(SWP\) formats. Manuals, using the WP and SWP concept described within this specification, are intended for use at Intermediate and Depot levels on all equipment and at Organizational level for equipment not using the MIL-PRF-83495 maintenance manual concept. This specification provides for Standard Generalized Markup Language \(SGML\) Document Type Definitions \(DTD\) usage \(see appendices A.1 through L\) required for electronic data delivery. All Appendices are intended for compliance when required.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18

MIL-DTL-87929D

APPENDIX I

a. Step-by-step procedures for installing items in container, in all standard storage and shipping

conigurations.

b. Preservation instructions.

c. Applicable container marking and sealing requirements.

I.3.5.6.3 Unpacking and Packaging SWPs. These SWPs shall include the information required by

I.3.5.6. An Unpacking and Packaging SWP shall be provided for sections, major components, training

munitions, or differing conigurations, as applicable.

I.3.5.7 Maintenance WP (WP 070 00). Procedures for authorized maintenance of the munitions shall be

included. A list of materials to be used shall be included. Consumable materials shall be in accordance with

I.3.2.g. Those required for cleaning, painting, and markings shall be listed only in WP 030 00 and in this

WP as speciied herein. Arrangement of the WP shall be in the following order, as applicable:

a. Safety Summary and Accident Prevention (see I.3.2.f.).

b. Sequence of Operations (see I.3.5.7.1).

c. Torque Requirements Table (see I.3.5.7.2).

d. Maintenance (see I.3.5.7.3).

e. Preparation for Use (see I.3.5.7.4).

f. Assembly (see I.3.5.7.5).

g. Checkout (see I.3.5.7.6).

h. Servicing (see I.3.5.7.7).

i. Disassembly (see I.3.5.7.8).

j. Component Repair (see I.3.5.7.9).

k. Cleaning, Corrosion Control, Painting, and Marking (see I.3.5.7.10).

I.3.5.7.1 Sequence of operations. When deviations are not authorized, the acquiring activity will provide

the appropriate sequence of work to be performed. Otherwise, this paragraph shall contain the following

statement: "Production techniques involving preparation of more than one item may require deviations

from the work sequence. Several procedures may be performed simultaneously, and in different work

areas, providing the preceding and subsequent tasks are not invalidated or interfered with and that all

safety and reliability requirements are observed."

I.3.5.7.2 Torque requirements table.

This table shall be arranged as follows and contain the appropriate

information in each column:

Torque

Requirements

Torque

Part Number

Nomenclature

I.3.5.7.3 Maintenance. Maintenance procedures described herein shall include all authorized maintenance

actions, including those required to respond to the defects noted as a result of inspections conducted in

accordance with WP 050 00 and/or tests conducted in accordance with WP 080 00.

I.3.5.7.4 Preparation for use. These instructions shall include all procedures for preparing an item for use,

such as inspection of components, assembly (buildup), installation of components, alignment, test, and

complete inspection, as applicable. When preparation for use/assembly results in change of identiication or

DoD Ammunition Code (DODAC), procedures shall be included to ensure all applicable functions are notiied.

I.3.5.7.5 Assembly.

Detailed assembly instructions shall be provided. Appropriate illustrations shall

be included.

I.3.5.7.6 Checkout.

Checkout instructions for assembled items shall be provided.